Dan, If you have the later SM1000 PCB, "F" I have designed a plug-in configuration PCB board for Yeasu, Icom and Kenwood radios. The Kenwood board "should" work for your rig but I did not have a TS-2k to verify. Let me know and I will send you one. There are others on the list with TS-2k so you should be getting some help either way.
Mel. K0PFX -----Original Message----- From: Daniel Curry <[email protected]> Sent: Thursday, October 8, 2020 3:30 PM To: [email protected] Subject: [Freetel-codec2] CN12 jumpers setting What is the difference between Rev D and Rev F board? I am having some issues with Patch Panel CN12 jumper setting? My Kenwood Ts-2000 has from the radio Pin 1 MiC Pin 2 PTT Pin 7 GND (MIC) External MIC uses this Pin 8 GND (STBY) External PTT uses this Using the external connection This works with no problem. I am having issues with pins 9 - 16 -- Daniel Curry US Air Force Veteran PGP: AD5A 96DC 7556 A020 B8E7 0E4D 5D5E 9BA5 C83E 8C92 _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2 _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
