I've just posted this on OpenDV: OK guys,
I've been running a "freebeacon" from the freedv.org website modified to both do an ident transmission every three mins and repeat the QSO received back in Codec2 mode. It's running now using a Yaesu FT0897D transceiver on 14.236 MHz USB, Codec2 mode 700d. No two HF stations have tried it's repeat capability in all the time it's been running, many months now. My vision is to "connect" this HF radio to the M17 network (as a start) to enable a remote HF station, somebody to talk to! I'm not a C or C++ programmer but I battle with it as I've done with "freebeacon". I note the M17 project uses Codec2 mode 3200 and 1600 but to transmit on HF, we really must use a lower bit-rate mode. I'm going to try interfacing the 8000 bits/sec audio in "mvoice" to the Codec2 library to come out/in to mode 700D. Any thoughts? --------------------------------------------------- Alan VK2ZIW Before the Big Bang, God, Sela. OpenWebMail 2.53, nothing in the cloud. _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
