Hi Alan, The fact that you get up to the "first start" dialog seems to indicate that it is indeed a build issue. I'm still working on a new build that includes https://github.com/drowe67/LPCNet/pull/48 and will announce it when available. If you're still having the hanging issue, we can further debug from there.
Thanks, -Mooneer K6AQ On Thu, Nov 17, 2022 at 6:14 PM Al Beard <bear...@unixservice.com.au> wrote: > *Hi Mooneer,* > > *I've installed Xcode 11 and used "brew" to get wxWidgets, cmake, sndfile, > samplerate, portaudio etc.* > > *And, one by one ie. LPCNet, Codec2 then FreeDV GUI and it all compiles > and creates a DMG file* > *which I've opened and moved the FreeDV app to Applications.* > > *When run, it notices, never been run before, Press OK and then "spinning > wheel" and "top" reports 100% CPU* > > *So I ran up FreeDV1.6 and allowed it to create the user config.* > > *Tried app FreeDV again and nothing nothing on the screen, but 100% CPU.* > > *Trying again the build_osx.sh script.* > > *No-go wxWidgets build fails here:* > > *$ ./configure --disable-shared --with-osx_cocoa > --enable-universal_binary=x86_64,arm64 --with-macosx-version-min=10.11 > --prefix=/Users/user/src/freedv-gui/build_osx/external/dist > --with-libjpeg=builtin --with-libpng=builtin --with-regex=builtin > --with-libtiff=builtin --with-expat=builtin CXXFLAGS=-stdlib=libc++ > -std=c++11 -DWX_PRECOMP -O2 -fno-strict-aliasing -fno-common* > > *Ho hum. I figure Xcode 11 cannot handle the arm64 world.* > > *Alan VK2ZIW* > > *On Tue, 15 Nov 2022 12:46:14 -0800, Mooneer Salem wrote* > > Hi Alan, > > > > As I haven't checked in any of the recent changes yet, there won't be a > Git version hash at the moment. However, based on the latest stack trace > you provided, it does seem like we're on the right track in terms of what > could be going on with the build (freedv_comptx() happens a lot later than > __codec2__nlp_create()). The next build will likely be an official > pre-release containing the changes I tried plus perhaps a few more. > > > > Thanks, > > > > -Mooneer K6AQ > > > > On Tue, Nov 15, 2022 at 12:11 PM Al Beard <bear...@unixservice.com.au> > wrote: > > >> >> >> > >> > *Well, crashed again,* >> > >> * > * >> > *To avoid version confusion, can you put something in "Version:" ?* >> > *BTW: I've not removed the previous version, I just renamed it* >> > *in the Applications folder. bad FreeDV to FreeDV185a* >> > >> * > * >> > *System here: HP Compaq 8200 Elite Small Form Factor i5 * >> > *Emulating with Hackintosh: iMac (27-inch, Late 2013)* >> > *Processor 3.09 GHz Quad-Core Intel Core i5* >> > *macOS Catalina * >> > >> * > * >> > >> * > * >> > >> > *Process: FreeDV [1466]* >> > *Path: /Applications/FreeDV.app/Contents/MacOS/FreeDV* >> > *Identifier: org.freedv.freedv* >> > *Version: ??? (1.8.5)* >> > *Code Type: X86-64 (Native)* >> > *Parent Process: ??? [1]* >> > *Responsible: FreeDV [1466]* >> > *User ID: 501* >> > >> * > * >> > *Date/Time: 2022-11-16 06:47:07.895 +1100* >> > *OS Version: Mac OS X 10.15.3 (19D76)* >> > *Report Version: 12* >> > *Anonymous UUID: E215C155-F950-4ED2-AF3A-7CB392630AD3* >> > >> * > * >> > >> * > * >> > *Time Awake Since Boot: 81000 seconds* >> > >> * > * >> > *System Integrity Protection: enabled* >> > >> * > * >> > *Crashed Thread: 0 Dispatch queue: com.apple.main-thread* >> > >> * > * >> > *Exception Type: EXC_BAD_INSTRUCTION (SIGILL)* >> > *Exception Codes: 0x0000000000000001, 0x0000000000000000* >> > *Exception Note: EXC_CORPSE_NOTIFY* >> > >> * > * >> > *Termination Signal: Illegal instruction: 4* >> > *Termination Reason: Namespace SIGNAL, Code 0x4* >> > *Terminating Process: exc handler [1466]* >> > >> * > * >> > *Thread 0 Crashed:: Dispatch queue: com.apple.main-thread* >> > *0 liblpcnetfreedv.0.4.dylib 0x00000001021202bb lpcnet_enc + >> 107* >> > *1 libcodec2.1.0.dylib 0x0000000101fbdd54 freedv_comptx + >> 324* >> > *2 org.freedv.freedv 0x000000010057ee44 >> MainFrame::test2020Mode_() + 772* >> > *3 org.freedv.freedv 0x000000010058655c >> MainFrame::MainFrame(wxWindow*) + 7116* >> > *4 org.freedv.freedv 0x000000010057eafd >> MainFrame::MainFrame(wxWindow*) + 29* >> > *5 org.freedv.freedv 0x000000010057e907 >> MainApp::OnInit() + 375* >> > *6 org.freedv.freedv 0x0000000100980327 >> wxApp::CallOnInit() + 359* >> > *7 org.freedv.freedv 0x0000000100bae4f8 wxEntry(int&, >> wchar_t**) + 104* >> > *8 org.freedv.freedv 0x000000010057e183 main + 35* >> > *9 libdyld.dylib 0x00007fff6ba457fd start + 1* >> > >> * > * >> > *Thread 1:* >> > *0 libsystem_pthread.dylib 0x00007fff6bc4a818 start_wqthread >> + 0* >> > >> > >> > >> * > * *On Tue, 15 Nov 2022 11:15:47 -0800, Mooneer Salem wrote* >> > > Hi Alan, >> > > >> > > Can you give >> https://www.dropbox.com/s/dqgoitt5xqcxhc2/FreeDV.dmg?dl=0 a shot and let >> me know how that goes? It seems that a recent LPCNet PR ( >> https://github.com/drowe67/LPCNet/pull/43) may have caused some code to >> inappropriately be compiled with AVX2 enabled, so this version has some >> tweaks to the CMake scripts to avoid that. >> > > >> > > Thanks, >> > > >> > > -Mooneer K6AQ >> > > >> > > On Mon, Nov 14, 2022 at 11:01 PM Mooneer Salem <moon...@gmail.com> >> wrote: >> > > >>> >>> >>> > > Hi Alan, >>> > > >>> > > This actually looks similar to what a few others reported on Linux >>> before I removed the Debian packages from the release. What does System >>> Information show for your processor/model? My 2019 16" MBP shows >>> "MacBookPro16,4" and "8-Core Intel Core i9" @ 2.3 GHz and seems to execute >>> and decode fine. (FWIW, I also have access to an M1 Mac Mini as well as a >>> 2011 MBA. I do remember an earlier 1.8.5 build working properly on the MBA, >>> though, albeit in Windows 10.) >>> > > >>> > > Also, if possible, can you try building it yourself from the >>> "ms-2020c" branch? The needed prerequisites can be installed with the >>> following MacPorts command: >>> > > >>> > > sudo port install subversion git libtool sox +universal cmake >>> > > >>> > > Thanks, >>> > > >>> > > -Mooneer K6AQ >>> > > >>> > > On Mon, Nov 14, 2022 at 10:09 PM Al Beard < >>> bear...@unixservice.com.au> wrote: >>> > > >>>> >>>> >>>> > > *Hi Mooneer,* >>>> > > >>>> * > > * >>>> > > *OSX on Catalina, not so good:* >>>> > > >>>> * > > * >>>> > > >>>> > > *Process: FreeDV [1050]* >>>> > > *Path: >>>> /Applications/FreeDV.app/Contents/MacOS/FreeDV* >>>> > > *Identifier: org.freedv.freedv* >>>> > > *Version: ??? (1.8.5)* >>>> > > *Code Type: X86-64 (Native)* >>>> > > *Parent Process: ??? [1]* >>>> > > *Responsible: FreeDV [1050]* >>>> > > *User ID: 501* >>>> > > >>>> * > > * >>>> > > *Date/Time: 2022-11-15 16:57:48.889 +1100* >>>> > > *OS Version: Mac OS X 10.15.3 (19D76)* >>>> > > *Report Version: 12* >>>> > > *Anonymous UUID: E215C155-F950-4ED2-AF3A-7CB392630AD3* >>>> > > >>>> * > > * >>>> > > >>>> * > > * >>>> > > *Time Awake Since Boot: 31000 seconds* >>>> > > >>>> * > > * >>>> > > *System Integrity Protection: enabled* >>>> > > >>>> * > > * >>>> > > *Crashed Thread: 0 Dispatch queue: com.apple.main-thread* >>>> > > >>>> * > > * >>>> > > *Exception Type: EXC_BAD_INSTRUCTION (SIGILL)* >>>> > > *Exception Codes: 0x0000000000000001, 0x0000000000000000* >>>> > > *Exception Note: EXC_CORPSE_NOTIFY* >>>> > > >>>> * > > * >>>> > > *Termination Signal: Illegal instruction: 4* >>>> > > *Termination Reason: Namespace SIGNAL, Code 0x4* >>>> > > *Terminating Process: exc handler [1050]* >>>> > > >>>> * > > * >>>> > > *Thread 0 Crashed:: Dispatch queue: com.apple.main-thread* >>>> > > *0 liblpcnetfreedv.0.4.dylib 0x000000010512c2ce >>>> __codec2__nlp_create + 254* >>>> > > *1 liblpcnetfreedv.0.4.dylib 0x000000010511d16c >>>> codec2_pitch_create + 108* >>>> > > *2 liblpcnetfreedv.0.4.dylib 0x0000000105121b6f >>>> lpcnet_dump_create + 159* >>>> > > *3 liblpcnetfreedv.0.4.dylib 0x00000001051239e1 >>>> lpcnet_freedv_create + 33* >>>> > > *4 libcodec2.1.0.dylib 0x0000000104fc78d7 >>>> freedv_2020x_open + 1095* >>>> > > *5 libcodec2.1.0.dylib 0x0000000104fc1775 >>>> freedv_open_advanced + 101* >>>> > > *6 libcodec2.1.0.dylib 0x0000000104fc1707 freedv_o* >>>> > > *bash-5.1$ * >>>> > > >>>> > > >>>> > > *================ Whereas FreeDV v1.6 works fine and has 2020 >>>> mode.* >>>> > > >>>> * > > * >>>> > > *On Mon, 14 Nov 2022 21:00:55 -0800, Mooneer Salem wrote* >>>> > > > Hi all, >>>> > > > >>>> > > > I've generated a pre-release build of FreeDV that contains the >>>> following: >>>> > > > >>>> > > > 1. Build system: >>>> > > > * Add checks for .git folder to prevent errors when building >>>> from official release tarballs. (PR #294) >>>> > > > 2. Enhancements: >>>> > > > * Update FreeDV configuration defaults to improve first-time >>>> usability. (PR #293) >>>> > > > 3. Bugfixes: >>>> > > > * Fix issue preventing macOS binaries from running on >>>> releases older than 12.0. (PR #301) >>>> > > > * Fix issue with 2020B not being selected as default on next >>>> start (PR #299) >>>> > > > 4. Documentation: >>>> > > > * Update manual to reflect Ubuntu renaming libsndfile-dev to >>>> libsnd1file-dev. (PR #297) >>>> > > > >>>> > > > Windows and macOS binaries (as well as source code) can be >>>> downloaded from >>>> https://github.com/drowe67/freedv-gui/releases/tag/v1.8.5-20221114. >>>> > > > >>>> > > > Thanks, >>>> > > > >>>> > > > -Mooneer K6AQ >>>> > > >>>> > > --------------------------------------------------- >>>> > > Alan VK2ZIW >>>> > > Before the Big Bang, God, Sela. >>>> > > OpenWebMail 2.53, nothing in the cloud. >>>> > > >>>> > > _______________________________________________ >>>> > > Freetel-codec2 mailing list >>>> > > Freetel-codec2@lists.sourceforge.net >>>> > > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >>>> > > >>> >>> >> > >> > --------------------------------------------------- >> > Alan VK2ZIW >> > Before the Big Bang, God, Sela. >> > OpenWebMail 2.53, nothing in the cloud. >> > >> > _______________________________________________ >> > Freetel-codec2 mailing list >> > Freetel-codec2@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >> > > > > > > --------------------------------------------------- > Alan VK2ZIW > Before the Big Bang, God, Sela. > OpenWebMail 2.53, nothing in the cloud. > > _______________________________________________ > Freetel-codec2 mailing list > Freetel-codec2@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >
_______________________________________________ Freetel-codec2 mailing list Freetel-codec2@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freetel-codec2
