Dear Wiki user, You have subscribed to a wiki page or wiki category on "Freevo Wiki" for change notification.
The following page has been changed by 62.235.20.23: http://freevo.sourceforge.net/cgi-bin/moin.cgi/DocumentationPage_2fPluginInfo ------------------------------------------------------------------------------ @@ -194,6 +194,8 @@ This plugin can display your cpu and case temperature and ram usage. This requires a properly configure lm_sensors! If the standard sensors frontend delivered with lm_sensors works your OK. +As of release 1.4-rc3, the sensors plugin can also read kernel 2.6 sensors (located in the /sys filesystem). This doesn't require lm_sensors installed, but needs the proper kernel Chip & Bus driver enabled (and loaded if u compiled them as plgins). + When one of your temperatures goes over the lm_sensors specified maximum temperature, the font color of all text on the idlebar changes to red, so u'll notice when your freevo box is starting to fry :). If you want to adjust these maximums, have a look at the lm_sensors documentation. The defaults are sane (60°s). {{{<cpusensor>}}} and {{{<casesensor>}}} are the corresponding lm_sensors: this should be ''temp1'', ''temp2'' or ''temp3''. Defaults to ''temp3'' for {{{<cpusensor>}}} and ''temp2'' for {{{<casesensor>}}}. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Freevo-wikilog mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-wikilog
