Ok I am having a problem running freevo on a non X framebuffer console. I have installed mga_vid from the Mplayer source. I have the alias line in my /etc/modules.conf
I did a freevo setup --display=mga (setup was previously xv using X11 framebuffer) I can use freevo/fbcon/mga-ntsc-800-600.sh and get a good test console that fills up the screen. but when I start freevo. I get a bunch of lines from matroxfb which state a problem with an xres of 800 rounded up (not unusual i have seen these before and the console is fine.) Then i get two pairs of line complaining about a 720 xres one time it says rounded up to 768 the other it says 736. then freevo comes up but there is a big section of black on the right side. like it must have used a 720 xres mode. Did i forget a step? Mike Ruelle [EMAIL PROTECTED] ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
