Hi, This isn't the proper list to get Xfree86 support, but I'll try to help.
If you set ZAxisMapping, you should also set Buttons. An example of this would be... <snip> Buttons 5 ZAxisMapping 4 5 </snip> The Buttons part tells the driver how many buttons to expect. The ZAxisMapping part tells the driver which buttons mean down/up. The ZAxisMapping takes two numbers as you see here. Also, I'm not sure which driver you need to use, but my MS Intellimouse requires the IMPS/2 protocol. ~Rob -----Original Message----- From: Jason Calabrese [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 11, 2003 8:29 PM To: [EMAIL PROTECTED] Subject: Re: [Freevo-users] USB mouse config > The best I've been able to do is > get the pointer to move up when I push to the left and down when I push > to the right. I can't get the buttons to do much and pushing up or down > dosen't do much. I've found that if I set Option "ZAxisMapping" "X", the pointer works but is rotated -90 degrees. Does anyone know a way to rotate it 90 degrees? The buttons still don't work. Please help, I know this isn't a direct freevo issue, but it is related. ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
