I used to use this card in the past. You can't get btaudio to work on it. To do recording I had to make my own script that muted and unmuted the linein on my sound card while recording. This also meant freevo could not be used for other things while recording with this card. I still have the script somewhere. I will find it and post it if you like.
-- Mike Ruelle [EMAIL PROTECTED] http://world.std.com/~mruelle/ On Mon, 2003-09-15 at 09:53, Greg Campbell wrote: > I am currently having the exact same problem. I am using Red Hat 9, and a TV > Wonder VE card. > > I have done two things: > 1) I have a audio cable running from the audio output on the TV card to the > audio input on the sound card, and I'm using /dev/audio as the device. It > works well for watching live, but no recorded sound. > > 2) I've also taken the advise in the FAQ and used the modprobe functions to > set up the dsp on the TV card itself. Again, it works fine for watching > live, but no sound is recorded. > > Here is a mencorder command line (taken from /tmp/freevo_record.lst). Note > that in this snapshot, the dsp is the audio device. > > usr/bin/mencoder -tv > on:driver=v4l:input=0:norm=NTSC:channel=22:chanlist=us-cable > :width=320:height=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp > :audiorate=32000:forceaudio:forcechan=1:buffersize=64 -ovc lavc > -lavcopts vcodec=mpeg4:vbitrate=1200:keyint=30 -oac mp3lame -lameopts > br=128:cbr:mode=3 -ffourcc divx -endpos 1790 -o > /var/multimedia/Movies/Recorded/09-13_10: > 00_-_New_Yankee_Workshop_Four_Drawer_Chest.avi ,C22ksps.zap2it.com > > > Any thoughts? > > Thanks, > Greg > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jeremy > Farnham > Sent: Thursday, September 11, 2003 4:35 PM > To: [EMAIL PROTECTED] > Subject: [Freevo-users] Problem Recording Sound > > I have installed Freevo 1.3.2 on Mandrake Linux 9.1, and after much fumbling > and web searching, got everything configured except television recording. I > can record the video successfully, but there is no audio. Watching TV > directly the sound comes through fine, so I'm thinking that it has something > to do with my Mencoder command line? An example of the line I'm using is: > > /usr/bin/mencoder -tv > on:driver=v4l:input=0:norm=NTSC:channel=49:chanlist=us-cable > :width=320:height=240:outfmt=yv12:device=/dev/video0:adevice=/dev/sound/dsp > :audiorate=32000:forceaudio:forcechan=1:buffersize=64 -ovc lavc > -lavcopts vcodec=mpeg4:vbitrate=350:keyint=300 -oac mp3lame -lameopts > br=128:cbr:mode=3 > -ffourcc divx -o > testfiles/Movies/Recorded/09-08_05:00_-_Buffy_the_Vampire_Slayer_The_Initiat > ive.avi > -v -endpos 750 >& /var/log/freevo/freevo_record_1063057619.log > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
