Freevo setup and working for TV and playing DVDs, also web interface works fine. Can set up recordings via web and all appears to work, channel choice, timing (out by an hour but can sort that later!), save
The out by one hour problem has to do with manualrecord.rpy and python2.2. I have been meaning to fix that.
and it appears to run and remove itself from pending list but then no recording appears (so I assume the recordserver is functioning normally)
In the freevo interface F6 appears to initiate a recording (but no choice re timing given at all) but again no output files found.
Your mencoder command is probably failing. Please check your recordserver log for details, and the command line it is using. It should be /var/log/freevo/recordserver-0.log or under /tmp/ somewhere if you have no /var/log/freevo/.
-Rob
-------------------------------------------------------
This SF.net email sponsored by: Enterprise Linux Forum Conference & Expo
The Event For Linux Datacenter Solutions & Strategies in The Enterprise Linux in the Boardroom; in the Front Office; & in the Server Room http://www.enterpriselinuxforum.com
_______________________________________________
Freevo-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/freevo-users
