Hi

New user, installed version 1.4 on Gentoo.

When launching Freevo, the starting bar gets to about half, mplayers controller launches and everything stops.  If I launch freevo --trace  Freevo launches correctly and no mplayer controller started !

The only erorr mesage is:

WARNING: no pre-cached data
Freevo will cache each directory when you first enter it. This can
be slow. Start "./freevo cache" to pre-cache all directories to speed
up usage of freevo

I tried the --cache option, tried to cache my whole hard drive ;-(

Any one with ideas why this would hang on launch ?

Here are my config files.

Darrell


cdparanoia = /usr/bin/cdparanoia
chanlist = us-cable
display = x11
fbxine = /usr/bin/fbxine
flac = /usr/bin/flac
geometry = 800x600
jpegtran = /usr/bin/jpegtran
lame = /usr/bin/lame
mencoder = /usr/bin/mencoder
mplayer = /usr/bin/mplayer
oggenc = /usr/bin/oggenc
renice = /usr/bin/renice
setterm = /usr/bin/setterm
tv = ntsc
tvtime = /usr/bin/tvtime
version = 2.1
xine = /usr/bin/xine
#if 0
# -----------------------------------------------------------------------
# local_conf.py - Edit this file for your local system settings
# -----------------------------------------------------------------------
# $Id: local_conf.py.example,v 1.20 2003/10/29 20:47:44 dischi Exp $
#
# Notes:
#   This file contains the important options from freevo_config.py that
#   you might want to change to suit your system. Remove the '#' to
#   uncomment the setting(s) you want to change. There are more options
#   in freevo_config.py, copy those that must be changed to this file.
#
#   DO NOT CHANGE ANYTHING IN freevo_config.py, ALWAYS MAKE THE CHANGES
#   IN local_conf.py TO MAKE UPDATES EASIER
#
#   Then put this file in ~/.freevo/ or /etc/freevo to make upgrades easier.
#   Freevo will look in those folders first for this file.
#
# -----------------------------------------------------------------------
# Freevo - A Home Theater PC framework
# Copyright (C) 2003 Krister Lagerstrom, et al. 
# Please see the file freevo/Docs/CREDITS for a complete list of authors.
# Please see the file freevo/COPYING for license info.
#
# -----------------------------------------------------------------------
#endif


# This version should match the version in freevo_config.py. It makes
# it easier to update this file. When you get a new version of Freevo,
# Freevo will tell you any changes made in freevo_config.py. After you
# merged those changes into this file, set this number to the new one.
CONFIG_VERSION  = 3.91


# ======================================================================
# General freevo settings:
# ======================================================================

AUDIO_DEVICE        = '/dev/dsp'      # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
AUDIO_INPUT_DEVICE  = '/dev/dsp1'     # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
MAJOR_AUDIO_CTRL    = 'VOL'           # Freevo takes control over one audio ctrl
#                                       # 'VOL', 'PCM' 'OGAIN' etc.
CONTROL_ALL_AUDIO   = 1               # Should Freevo take complete control of audio
MAX_VOLUME          = 90              # Set what you want maximum volume level to be.
DEFAULT_VOLUME      = 80              # Set default volume level.
TV_IN_VOLUME        = 60              # Set this to your preferred level 0-100.
VCR_IN_VOLUME       = 90              # If you use different input from TV
DEV_MIXER           = '/dev/mixer'    # mixer device

START_FULLSCREEN_X  = 0               # Start in fullscreen mode if using x11 or xv.

CONFIRM_SHUTDOWN    = 0               # ask before shutdown

#
# Physical ROM drives, multiple ones can be specified
# by adding comma-seperated and quoted entries.
#
# Format [ ('mountdir1', 'devicename1', 'displayed name1'),
#          ('mountdir2', 'devicename2', 'displayed name2'), ...]
#
# Set to None to autodetect drives in during startup from /etc/fstab,
# set to [] to disable rom drive support at all
#ROM_DRIVES = [ ('/mnt/cdrom', '/dev/dvd', 'CD-1'),
#               ('/mnt/burner', '/dev/sr0', 'CD-2')]
ROM_DRIVES = []

# hide discs from the wrong menu (e.g. VCDs in audio menu) and empty discs
HIDE_UNUSABLE_DISCS = 1               

# ROM_SPEED = 0                       # try to set the drive speed of the rom
                                      # drive a good value for playing movies
                                      # with a silent drive is 8


#
# see src/event.py for a list of all possible events. You can add more keybindings
# by adding them to the correct hash. E.g. pressing 1 should send 'contrast -100'
# to mplayer, just write the folling line to your local_conf.py
#
# EVENTS['video']['1'] = Event(VIDEO_SEND_MPLAYER_CMD, arg='contrast -100')



# ======================================================================
# Plugins:
# ======================================================================

# you can remove all plugins loaded in freevo_config.py
#
# Examples:
# plugin.remove(plugin_tv) or
# plugin.remove('tv') will remove the tv module from the main menu
# plugin.remove(rom_plugins['image']) will remove the rom drives from the
#   image main menu,
# plugin.remove('rom_drives.rom_items') will remove the rom drives from all
#   menus


# Use this ivtv_record instead if you have an ivtv based card (PVR-250/350)
# and want freevo to do everthing for you.  TV_SETTINGS must be set 
# correctly.  To use you need the following two lines in local_conf.py:
# plugin.remove('tv.generic_record')
# plugin_record = plugin.activate('tv.ivtv_record')

# For joystick support:
# plugin.activate('joy')

# Idlebar plugin:

plugin.activate('idlebar')
plugin.activate('idlebar.mail',    level=10, args=('/var/spool/mail/root', ))
#plugin.activate('idlebar.tv',      level=20)
plugin.activate('idlebar.weather', level=30, args=('CYVR',))
plugin.activate('idlebar.clock',   level=50)
plugin.activate('idlebar.cdstatus',   level=20)
plugin.activate('idlebar.holidays',   level=20)
plugin.activate('idlebar.tv',   level=20, args=( 12, ) )

# ======================================================================
# Freevo directory settings:
# ======================================================================

# You can change all this variables in the folder.fxd on a per folder
# basis
#
# Example:
# <freevo>
#   <folder title="Title of the directory" img-cover="nice-cover.png">
#     <setvar name="directory_autoplay_single_item" val="0"/>
#     <info>
#       <content>A small description of the directory</content>
#     </info>
#   </folder>
# </freevo>

#
# Should playlists be available for movies, and all movies in a directory
# be played in succession (unless you press STOP/EXIT)?
#
# MOVIE_PLAYLISTS = 0

#
# Should a Random Playlist be generated for Music?
#
# AUDIO_RANDOM_PLAYLIST = 1

#
# Should directories sorted by date instead of filename
# 0 = no, 1 = yes, 2 = no for normal menus, yes for DIR_RECORD
#
# DIRECTORY_SORT_BY_DATE = 2

#
# Show the items in the list in reverse order
#
DIRECTORY_REVERSE_SORT = 0

#
# Should we use "smart" sorting to ignore 'The' in directories
# 0 = no, 1 = yes
#
# DIRECTORY_SMART_SORT = 0

#
# Should freevo autoplay the item if only one item is in the directory
#
# DIRECTORY_AUTOPLAY_SINGLE_ITEM = 1

#
# Force the skin to a specific layout number. -1 == no force. The layout
# toggle with DISPLAY will be disabled
#
# FORCE_SKIN_LAYOUT = -1

#
# Formatstring for the audio item names, possible strings:
# a = artist, n = tracknumber, t = title, y = year, f = filename
#
# This will show the title and the track number 
AUDIO_FORMAT_STRING = '%(n)s - %(t)s'
# This is the default - track name only
#
# AUDIO_FORMAT_STRING = '%(t)s'

#
# Use media id tags to generate the name of the item. This should be
# 1 all the time and only be disabled in directories with broken tags
#
# USE_MEDIAID_TAG_NAMES = 1

# ======================================================================
# Freevo movie settings:
# ======================================================================

#
# Where the movie files can be found.
#
DIR_MOVIES = [ ('action movies', '/movies'),
               ('funny stuff', '/movies') ]

#
# This is where recorded video is written.
#
# XXX the path doesn't work from the www cgi scripts!
DIR_RECORD = '/movies'

#
# Directory for XML definitions for DVDs and VCDs. Items in this
# directory won't be in the MOVIE MAIN MENU, but will be used to find
# titles and images for the current DVD/VCD
#
MOVIE_DATA_DIR = '/movies'

#
# Directory containing images for tv shows. A tv show maches the regular
# expression TV_SHOW_REGEXP, e.g. "Name 3x10 - Title". If an image
# name.(png|jpg) (lowercase) is in this directory, it will be taken as cover
# image
#
TV_SHOW_DATA_DIR = "/movies"

#
# Directory for cover images for CD/VCD/DVD and music CDs or when you can't
# add a cover image to the dir you want. Not for replacing the normal
# cover file function.
#
COVER_DIR = '/movies'

#
# Only scan MOVIE_DATA_DIR and TV_SHOW_DATA_DIR for fxd files containing
# informations about a disc. If you only have the fxd files for discs in
# one of this directories (and subdirectories), set this to 1, it will
# speed up startup, 0 may be needed if you have fxd files with disc links
# in your normal movie tree.
#
ONLY_SCAN_DATADIR = 1


# ======================================================================
# Freevo audio settings:
# ======================================================================

#
# Where the Audio (mp3, ogg) files can be found.
# Format: [ ('Title1', 'directory1', 'mplayer options'),
#           ('Title2', 'directory2'), ... ]
# The 'mplayer options' field can be omitted.
#
DIR_AUDIO = [ ('Test Files', '/music') ]


# ======================================================================
# Freevo image viewer settings:
# ======================================================================

# Where the image files can be found.

# DIR_IMAGES = [ ('Arizona 2002', '/video/SlideShows/arizona-2002.ssr'),
#                ('Carmel 2002',  '/video/SlideShows/carmel.ssr'),
#                ('Pics',  '/video/SlideShows') ]

# The viewer now supports a new type of menu entry, a slideshow file.
# It also has the slideshow alarm signal handler for automated shows.
# It uses a new configuration option:

# SUFFIX_IMAGE_SSHOW = [ 'ssr' ]

# This defines the file extensions of slideshow playlists. When DIR_IMAGES
# is parsed, it will look for entries that match the SUFFIX_IMAGE_SSHOW
# patterns. If it finds a match, then it will classify that entry as a
# slideshow playlist instead of a directory of images. For example:



# ======================================================================
# Freevo games settings:
# ======================================================================
#
# MAME is an emulator for old arcade video games. It supports almost
# 2000 different games! The actual emulator is not included in Freevo,
# you'll need to download and install it separately. The main MAME
# website is at http://www.mame.net, but the version that is used here
# is at http://x.mame.net since the regular MAME is for Windows.
#
# SNES stands for Super Nintendo Entertainment System.  Freevo relies
# on other programs that are not included in Freevo to play these games.
# 
# NEW GAMES SYSTEM :
# =================
# The DIR_GAMES structure is now build as follows :
# <NAME>, <FOLDER>, (<TYPE>, <COMMAND_PATH>, <COMMAND_ARGS>, <IMAGE_PATH>, \
# [<FILE_SUFFIX_FOR_GENERIC>])
# where :
#              - <TYPE> : Internal game types (MAME or SNES) or
#                         generic one (GENERIC)
#              - <COMMAND_PATH> : Emulator command
#              - <COMMAND_ARGS> : Arguments for the emulator
#              - <IMAGE_PATH>   : Optionnal path to the picture
#              - <FILE_SUFFIX_FOR_GENERIC> : If the folder use the GENERIC
#                                            type, then you must specify here
#                                        the file suffix used by the emulator
# DIR_GAMES = [ ('MAME', '/home/media/games/xmame/roms',     
#                ('MAME', '/usr/local/bin/xmame.SDL', '-fullscreen -modenumber 6', 
#                 '/home/media/games/xmame/shots', None)),
#               ('SUPER NINTENDO', '/home/media/games/snes/roms', 
#                ('SNES', '/usr/local/bin/zsnes', '-m -r 3 -k 100 -cs -u', '', None )),
#               ('Visual Boy Advance', '/home/media/games/vba/roms/',
#                ('GENERIC', '/usr/local/vba/VisualBoyAdvance', '', '', [ 'gba' ] )),
#               ('MEGADRIVE', '/home/media/games/megadrive/roms', 
#                ('GENESIS', '/usr/local/bin/generator-svgalib', '', '', '' )) ]
 
# are used for the Mame arcade emulator.
#
GAMES_NICE        = -20       # Priority of the game process. 0 is unchanged,
                              # <0 is higher prio, >0 lower prio.
                              # prio <0 has no effect unless run as root.
 
MAME_CACHE = '%s/romlist-%s.pickled' % (FREEVO_CACHEDIR, os.getuid())

# ======================================================================
# freevo OSD section:
# ======================================================================

#
# XML file for the skin
#
SKIN_XML_FILE = 'noia'

#
# Start the new skin with a specific layout. Default is 0, DISPLAY toggles
# between the different layouts. If a menu hasn't that layout number, 0 will
# be taken
#
# SKIN_START_LAYOUT = 0

#
# Select a way when to switch to text view even if a image menu is there
# Possible values are
# 1. force text view when all items have the same image and there are no
#    directories
# 2. Ignore the directories, always switch to text view when all images
#    are the same
#
SKIN_FORCE_TEXTVIEW_STYLE = 1

#
# Force text view for the mediamenu (first menu for video, audio, images and
# games). 
#
SKIN_MEDIAMENU_FORCE_TEXTVIEW = 0


# ENABLE_SHUTDOWN_SYS = 0  # Performs a whole system shutdown at SHUTDOWN!
                           # For standalone boxes.

# The following fours variables have different settings in freevo_config.py
# based on the display you use.

# Exec a script on the osd close.
# OSD_SDL_EXEC_AFTER_CLOSE = ""

# Exec a script after startup
# OSD_SDL_EXEC_AFTER_STARTUP = ""

# OVERSCAN_X = 0
# OVERSCAN_Y = 0

    
# ======================================================================
# Remote control section
# ======================================================================


#
# you need a lircrc file, like this:
#
# begin
#       prog = freevo
#       button = select
#       config = SELECT
# end
#
# Check contrib/lirc for examples and helpers/freevo2lirc.pl for a converter
# script.
#

# LIRCRC = '/etc/freevo/lircrc'

#
# Set the Joy device to 0 to disable, 1 for js0, 2 for js1, etc...
# Supports as many buttons as your controller has,
# but make sure there is a corresponding entry in JOY_CMDS.
# You will also need to plugin.activate('joy').
# FYI: new kernels use /dev/input/jsX, but joy.py will fall back on /dev/jsX
#
# JOY_DEV = 0
# JOY_CMDS = {
#     'up'             : 'UP',
#     'down'           : 'DOWN',
#     'left'           : 'LEFT',
#     'right'          : 'RIGHT',
#     'button 1'       : 'PLAY',
#     'button 2'       : 'PAUSE',
#     'button 3'       : 'STOP',
#     'button 4'       : 'ENTER',
#     }



# ======================================================================
# MPlayer section:
# ======================================================================

#MPLAYER_AO_DEV       = 'alsa9:/dev/dsp'  # e.g.: oss,sdl,alsa, see mplayer docs

DVD_LANG_PREF        = 'en'      # Order of preferred languages on DVD.
# DVD_SUBTITLE_PREF    = ''              # Order of preferred subtitles on DVD.

# Priority of mplayer process. 0 is unchanged, <0 is higher prio, >0 lower prio.
# prio <0 has no effect unless run as root.
MPLAYER_NICE         = -20

MPLAYER_ARGS_DEF     = (('-ac mad, -autosync 100 -nolirc -autoq 100 -screenw %s '
                        + '-screenh %s -fs') % (CONF.width, CONF.height))


#
# Mplayer options to use the software scaler. If your CPU is fast enough, you
# might try a software scaler. You can disable it later for some larger files
# with the mplayer option '-nosws'. If you have -framedrop or -hardframedrop
# as mplayer option, the software scaler will also not be used.
# A good value for this variable is
MPLAYER_SOFTWARE_SCALER = "-subfont-text-scale 5 -fs -sws 2 -vf scale=%s:-3,"\
                           "expand=%s:%s " % ( CONF.width, CONF.width, CONF.height )
# older versions of mplayer may need
# MPLAYER_SOFTWARE_SCALER = '-xy %s -sws 2 -vop scale:-1:-1:-1:100' % CONF.width
#

#
# Mplayer args for the different kinds of files. Possible values are dvd, vcd,
# cd (audio cd), tv, all extentions and default if nothing matches
#
MPLAYER_ARGS = { 'dvd': '-cache 8192',
                  'vcd': '-cache 4096',
                 'cd' : '-cache 500 -cdda speed=1',
                 'tv' : '-nocache',
                 'avi': '-cache 5000 -idx',
                 'rm' : '-cache 5000 -forceidx',
                 'default': '-cache 5000'
                 }

# Number of seconds before seek value times out. This is used when
# seeking to a specified number of minutes into a movie. If you make
# a mistake or change your mind, the seek value will timeout after
# this many seconds
#
MPLAYER_SEEK_TIMEOUT = 8

# Autocrop files when playing. This is usefull for files in 4:3 with black
# bars on a 16:9 tv
#
MPLAYER_AUTOCROP = 0

#
# Try to set correct 'delay' and 'mc' values for mplayer based on the delay
# from mmpython. This should correct av sync problems with mplayer for some
# files, but may also break things (I don't know, that's why it's disabled
# as default). WARNING: when seeking, the playpack is out of sync for some
# seconds! This only works with mmpython > 0.2
#
# MPLAYER_SET_AUDIO_DELAY = 0


# ======================================================================
# Xine section:
# ======================================================================

# You need xine-ui version greater 0.9.21 to use the all the features
# of the xine plugin

# XINE_AO_DEV = 'oss'                     # alsa or oss
# XINE_USE_VCDNAV = 0                     # use xine for VCD nav playback


# ======================================================================
# TV:
# ======================================================================

#
# Watching TV
#
# XXX You must change this to fit your local conditions!
#
# TV_SETTINGS  = 'NORM INPUT CHANLIST DEVICE'
# VCR_SETTINGS = 'NORM INPUT CHANLIST DEVICE'
#
#NORM: ntsc
#INPUT: television
#CHANLIST:us-cable
#
# us-bcast, us-cable, us-cable-hrc, japan-bcast, japan-cable, europe-west,
# europe-east, italy, newzealand, australia, ireland, france, china-bcast,
# southafrica, argentina, canada-cable
#
# DEVICE: Usually /dev/video0, but might be /dev/video1 instead for multiple
# boards.
#
TV_SETTINGS = '%s television %s /dev/video0' % (CONF.tv, CONF.chanlist)
#TV_SETTINGS = '%s television %s /dev/video0' % (ntsc, us-cable)
# This is the size (in MB) of the timeshift buffer, ie: how long you can
# pause tv for.  This is set to a low default because the default buffer
# location is under FREEVO_CACHEDIR and we don't want to blow /var or /tmp.
TIMESHIFT_BUFFER_SIZE = 128

TIMESHIFT_ENCODE_CMD = 'mp1e -m3 -c%s -p%s -r14,100' % \
                       (TV_SETTINGS.split()[3], AUDIO_INPUT_DEVICE)

TIMESHIFT_BUFFER = '%s/timeshift.mpeg' % FREEVO_CACHEDIR

TV_CHANNEL_PROG = './chchan %(channel)s %(norm)s %(freqtable)s'

TV_DATEFORMAT = '%e-%b' # Day-Month: 11-Jun
TV_TIMEFORMAT = '%H:%M' # Hour-Minute 14:05


#
# XXX Recording is still work in progress. You need to change
# XXX the entire string below to fit your local settings.
# XXX Eventually TV norm (PAL/NTSC) etc will be taken from the
# XXX other flags. VCR_xxx and TV_REC_xxx is not used yet!
# XXX You also need to have the recording daemon running, see
# XXX the website docs or the mailing lists if that fails.
# XXX Example cron script:
# XXX * * * * * /usr/local/freevo/freevo execute src/tv/record_daemon.py

# if using record_daemon from cron
REC_SCHEDULE_FILE = '/tmp/freevo_record.lst'

# if using the persitant record_server
RECORD_SCHEDULE = '%s/record_schedule.xml' % FREEVO_CACHEDIR

RECORD_SERVER_IP = 'localhost'
RECORD_SERVER_PORT = 18001

#
# XXX Please see the mencoder docs for more info about the settings
# XXX below. Some stuff must be changed (adevice), others probably
# XXX should be ("Change"), or could be in some cases ("change?")
VCR_CMD = ('/usr/local/bin/mencoder ' +    # Change. Absolute path to the runtime
          '-tv on:driver=v4l:input=0' +   # Input 0 = Comp. V. in
            ':norm=NTSC' +                  # Change
            ':channel=%(channel)s' +         # Filled in by Freevo
            ':chanlist=us-cable' +          # Change
            ':width=720:height=480' +       # Change if needed
            ':outfmt=yv12' +                # Prob. ok, yuy2 might be faster
            ':device=/dev/video0' +         # CHANGE!
            ':adevice=/dev/dsp' +          # CHANGE!
            ':audiorate=44100' +            # 44100 for better sound
            ':forceaudio:forcechan=1:' +    # Forced mono for bug in my driver
            'buffersize=64' +               # 64 Megabyte capture buffer, change?
            ' -ovc lavc -lavcopts ' +       # Mencoder lavcodec video codec
            'vcodec=mpeg4' +                # lavcodec mpeg-4
            ':vbitrate=1200:' +             # Change lower/higher, bitrate
            'keyint=10 ' +                  # Keyframe every 10 secs, change?
            '-oac mp3lame -lameopts ' +     # Use Lame for MP3 encoding
            'br=128:cbr:mode=3 ' +          # MP3 const. bitrate, 128 kbit/s
            '-ffourcc divx ' +              # Force 'divx' ident, better compat.
            '-endpos %(seconds)s ' +        # only mencoder uses this so do it here.
            '-o %(filename)s.avi ')                   # Filled in by Freevo

# XXX Not used yet20
# VCR_SETTINGS = '%s composite1 %s /dev/video0' % (CONF.tv, CONF.chanlist)

# TV capture size for viewing and recording. Max 768x480 for NTSC,
# 768x576 for PAL. Set lower if you have a slow computer!
#
# For the 'tvtime' TV viewing application, only the horizontal size is used.
# Set the horizontal size to 400 or 480 if you have a slow (~500MHz) computer,
# it still looks OK, and the picture will not be as jerky.
# The vertical size is always either fullscreen or 480/576 (NTSC/PAL)
# for tvtime.
TV_VIEW_SIZE = (640, 480)

# XXX Not used yet
# TV_REC_SIZE = (320, 240)   # Default for slower computers

# Input formats for viewing and recording. The format affect viewing
# and recording performance. It is specific to your hardware, so read
# the MPlayer docs and experiment with mplayer to see which one fits
# your computer best.
#TV_VIEW_OUTFMT = 'yuy2'   # Better quality, slower on pure FB/X11
# XXX Not used yet
# TV_REC_OUTFMT = 'yuy2'


#
# Settings for ivtv based cards such as the WinTV PVR-250/350.
#
# XXX TODO: Add descriptions and valid settings for each option.
# bitrate in bps
# stream type
# Options are: 0 (mpeg2_ps), 1 (mpeg2_ts), 2 (mpeg1), 3 (mpeg2_pes_av),
#              5 (mpeg2_pes_v), 7 (mpeg2_pes_a), 10 (dvd)

# IVTV_OPTIONS = {
#     'input'         : 4,
#     'resolution'    : '720x480',
#     'aspect'        : 2,
#     'audio_bitmask' : 233,
#     'bframes'       : 3,
#     'bitrate_mode'  : 1,
#     'bitrate'       : 4000000,
#     'bitrate_peak'  : 4000000,
#     'dnr_mode'      : 0,
#     'dnr_spatial'   : 0,
#     'dnr_temporal'  : 0,
#     'dnr_type'      : 0,
#     'framerate'     : 0,
#     'framespergop'  : 15,
#     'gop_closure'   : 1,
#     'pulldown'      : 0,
#     'stream_type'   : 10,
# }

#
# FREQUENCY_TABLE - This is only used when Freevo changes the channel natively.
# This is only the case if you are using V4L2 and any of the following plugins:
# timeshift, ivtv_record, ivtv_basic_tv.
# For the standard frequancy tables see src/tv/freq.py.  To add your own just 
# replace tuner_id in the following example with a valid tuner id (ie: '5' or
# 'BBC1') and a frequency in KHz.  You may have as many entries as you like,
# anything here will simply override a coresponding entry in your standard
# frequency table and you can also have entries here that are not present i
# there.

# FREQUENCY_TABLE = {
#     'tuner_id'   :    55250,
# }



#
# TV Channels. This list contains a mapping from the displayed channel name
# to the actual channel name as used by the TV watching application.
# The display name must match the names from the XMLTV guide,
# and the TV channel name must be what the tuner expects (usually a number).
#
# The TV menu is supposed to be supported by the XMLTV application for
# up to date listings, but can be used without it to just display
# the available channels.
#
# This list also determines the order in which the channels are displayed!
# N.B.: You must delete the XMLTV cache file (e.g. /var/cache/freevo/TV.xml.pickled)
#       if you make changes here and restart!
#
# Format: [('xmltv channel id', 'freevo display name', 'tv channel name'), ...]
#
# If this variable is set to None (default), Freevo will try to auto-detect
# the channel list based on the xmltv file. This doesn't work for all
# xmltv grabber, e.g. the German list doesn't contain station lists. In this
# case Freevo will output the possible list for you to add them manually.
#
# If auto-detection doesn't work or you want to edit the list, run
# freevo tv_grab -query.
#
# Setting this variable to [] will deactivate the tv guide. If you don't have
# a tv card, you may also want to add plugin.remove('tv') to remove the whole
# tv menu.
#
# All channels listed here will be displayed on the TV menu, even if they're
# not present in the XMLTV listing.
# 
#
# Timedependent channels:
#
# The TV_CHANNELS-list can look like this:
#
#TV_CHANNELS = [('21', 'SVT1',              'E5'),
#              ('22', 'SVT2',              'E3'),
#              ('26', 'TV3',               'E10'),
#              ('27', 'TV4',               'E6'),
#              ('10', 'Kanal 5',           'E7'),
#              ('60', 'Fox Kids',          'E8', ('1234567','0600','1659')),
#              ('16', 'TV6',               'E8', ('1234567','1700','2359'),
#                                                ('1234567','0000','0300')),
#               ('14', 'MTV Europe',        'E11') ]
#
# As you can see the list takes optional tuples:
# ( 'DAYS', 'START','END')
#
# 1234567 in days means all days.
# 12345 would mean monday to friday.
#
# It will display "Fox Kids" from 06:00 to 16:59 and "TV6" from 17:00 to 03:00. 
# 03:00 to 06:00 it won't be displayed at all.
#



# Program to grab xmltv listings. To get a grabber, you need to download
# xmltv. A possible value for users in the USA is tv_grab_na
# Use the tv_grab helper to grab the listings and cache them. Start
# 'freevo tv_grab --help' for more informations.

XMLTV_GRABBER = '/usr/bin/tv_grab_na'

# If you want to run tv_sort on your listings add the path to tv_sort here.
# tv_sort will make sure all your programs have proper stop times, otherwise
# programs might get cut off at midnight.

XMLTV_SORT = '/usr/bin/tv_sort'

# Number of days the grabber should get

XMLTV_DAYS = 5



# ======================================================================
# Builtin WWW server settings
# ======================================================================

# XXX THIS IS WORK IN PROGRESS! 
#
# To activate the build in web server, please activate the www plugin
# in your local_conf.py:
#
#plugin.activate('www')

#
# Web server port number. 80 is the standard port, but is often
# taken already by apache, and cannot be used unless the server
# runs as root. Use port 8080 as the default, change to 80 if
# needed.
#
WWW_PORT = 80

#
# Username / Password combinations to login to the web interface.
# These should be overridden in local_conf.py
# 
WWW_USERS = { "darrell" : "lonetree",
          "optional" : "changeme2" }
plugin.remove ('tv.mplayer')
plugin.activate ('tv.tvtime')
plugin.activate ('df')
plugin.remove ('video.xine')
#plugin.remove ('audio.mplayer')



Reply via email to