Ok , I copied the codecs.conf file from /usr/share/doc/mplayer~/ to /etc/mplayer , now it only complains about frameno.avi and file://.mplayer/mencoder
----- Original Message ----- From: "Bikr" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, January 13, 2004 1:00 PM Subject: Re: [Freevo-users] recording.. > If I formed that command propery then it looks like the error is telling me > that I don't have mplayer configured properly , ie;; codecs.conf isn't there > and frameno.avi and mencoder etc.. any suggestions how to fix??? Below is > the results of the command.. =\ > > > > > > > bash-2.05b# /usr/bin/mencoder -tv > on:driver=v41:input=0:norm=NTSC:channel=61:chanlist=us-cable:width=320:heigh > t=240:outfmt=yv12:device=/dev/video0:adevice=/dev/dsp:audiorate=32000:forcea > udio:forcechan=1:buffersize=64 -ovc lavc -lavcopts > vcodec=mpeg4:vbitrate=1200:keyinit=30 -oac mp3lame -lameopts > br=128:cbr:mode=3 -ffourcc divx -endpos 1789 -o > /media/tv/0-13_11:30_Real_TV_-_.avi > > MEncoder 1.0pre3-3.2.2 (C) 2000-2003 MPlayer Team > > CPU: Advanced Micro Devices Duron MG Morgan 1103 MHz (Family: 6, Stepping: > 0) > Detected cache-line size is 64 bytes > CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0 > Compiled with Runtime CPU Detection - WARNING - this is not optimal! > To get best performance, recompile MPlayer > with --disable-runtime-cpudetection. > Reading file://.mplayer/codecs.conf: Can't open '//.mplayer/codecs.conf': No > such file or directory > Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No > such file or directory > Using built-in default codecs.conf. > File not found: 'frameno.avi' > Failed to open frameno.avi > Reading config file file://.mplayer/mencoder: No such file or directory > -tv on is deprecated, use tv:// instead > Exiting... (error parsing cmdline) > bash-2.05b# > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
