dxr3 kernel modules are installed as follows. I untarred the source, and modified the Makefile to change the first EXTRA_CFLAGS line to say EM8300_VIDEOMODE_NTSC from the EM8300_VIDEOMODE_PAL that is there by default.
then I make everything normally. I then use the supplied ldm and rdm scripts that come with the em8300 drivers as they are. I modprobe the modules with no options to get it working for me. This is on a Slackware 9.1 system using the latest 2.4.23 kernel. The one line changed in the Makefile in the modules directory of the em8300 driver is all that I needed to change to enable NTSC output. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Rob Shortt Sent: Tuesday, January 13, 2004 11:56 AM To: [EMAIL PROTECTED] Subject: Re: [Freevo-users] dxr3 and libSDL Gray, Tim wrote: > yup. I simply set the dxr3 driver for NTSC and ignore everything in the > patch. > > it works fine even with the PAL stuff in the patch. That's good to hear. Last night I did some work porting the patch to SDL12 cvs and last ffmpeg release (0.4.8). I had to change a few things to get it to build but haven't had a chance to test it. Tim, in order to save me some time can you tell me how your dxr3 modules are configured? Modprobe options and such. Thanks! -Rob > > -----Original Message----- > From: Rob Shortt [mailto:[EMAIL PROTECTED] > Sent: Tuesday, January 13, 2004 11:46 AM > To: [EMAIL PROTECTED] > Subject: [Freevo-users] dxr3 and libSDL > > > > Hi all, > > I have a dxr3 card that I am using in a Freevo box for a friend and have > been working on the dxr3 patch for SDL. It looks like there are some > PAL things hardcoded in the patch so I was wondering if there is anyone > out there that is using NTSC and a dxr3 for Freevo. > > Thanks, > Rob > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users > > > ------------------------------------------------------- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > _______________________________________________ > Freevo-users mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users