That did the trick, thanks Rob! Now if I could just get the tv output to stop flickering.....
----- Original Message ----- From: "Rob Shortt" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 06, 2004 3:40 AM Subject: Re: [Freevo-users] dfbmga issues > [EMAIL PROTECTED] wrote: > > Ok, back again.... > > > > Having "display = dfbmga" in my freevo.conf does not ouput the freevo > ... > > export SDL_VIDEODRIVER=directfb > > export SDL_DIRECTFB_MGA_CRTC2=1 > > export SDL_DIRECTFB_MGA_STRETCH=1 > > export SDL_DIRECTFB_MGA_OVERSCAN=1 > > So far so good with your config, I think I know what's wrong... > > > > Don't know if it will help much, but here is the ouput from freevo & mplayer > > when they are run: > > (*) DirectFB/Layer: Enabled 'FBDev Primary Layer'. > > SDL DirectFB_SetVideoMode: [EMAIL PROTECTED], flags: 0x00000000 > > Freevo is only outputing to your monitor as you said, "FBDev Primary > Layer". You want to see "Matrox CRTC2" like mplayer reports. Look at > your /etc/directfbrc and add primary-layer=02. Personally I don't trust > the crtc2 code in SDL (it works a bit sketchy) and I don't use > SDL_DIRECTFB_MGA_*. > > HTH, > -Rob ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Freevo-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/freevo-users
