Hello again!
I still have a little problem with this.
i changed my values in local_conf.py according to ivtvctl -a
local_conf.py
TV_IVTV_OPTIONS = {
'input' : 0,
'resolution' : '720x576',
'aspect' : 2,
'audio_bitmask' : 233,
'bframes' : 3,
'bitrate_mode' : 0,
'bitrate' : 8000000,
'bitrate_peak' : 9600000,
'dnr_mode' : 0,
'dnr_spatial' : 0,
'dnr_temporal' : 8,
'dnr_type' : 0,
'framerate' : 0,
'framespergop' : 12,
'gop_closure' : 1,
'pulldown' : 0,
'stream_type' : 14,
}
the out put of ivtvctl -a is located
http://holmberg.mine.nu/ivtvctl
the local_conf.py
http://holmberg.mine.nu/local_conf.py.txt
when i try to watch the tv i still get the same error.
The stream 'pvr://tmp/xine-buf-' use an
unsupported codec:
Audio Codec: MPEG layer 2/3 (OxO)
Start playback anyway
The file /tmp/xine-buf- don't exist but a file
/tmp/xine-buf-00000000_00000000.vob
exist.
and if i try to watch tv manual with the followning command taken form the
debug log file
/usr/bin/xine --hide-gui -pq -g -B --geometry 756x562 --no-splash --no-lirc
--post=pp:quality=10,expand -V xv -A alsa --stdctl pvr://tmp/xine-buf-, poll=-1
i get the same error as above
so my question is xine supose to play the file /tmp/xine-buf- or
/tmp/xine-buf-00000000_00000000.vob
i try to use the setting
XINE_TV_TIMESHIFT_FILEMASK = "tmp/xine-buf-00000000_00000000.vob"
but the same error
and i can't switch channel but thats the next problem for me.
/Peter
* Duncan Webb ([EMAIL PROTECTED]) wrote:
> Evan Hisey wrote:
> > Peter-
> > Run Ivtvctl -a. Compare the Codec Parameters to you TV_IVTV_OPTIONS.
> > It lloks like a few of your options may be wrong.
> >
> > Evan
> >
> > On 1/25/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> >> Hello!
> >> i have some truble with freevo and ivtv driver.
> >> some info:
> >> I run Ubuntu edgy.
> >>
> >> uname -a
> >> Linux antehtpc 2.6.17-10-generic #2 SMP Tue Dec 5 22:28:26 UTC 2006 i686
> >> GNU/Linux
> >> lspci -v
> >> 00:09.0 Multimedia video controller: Internext Compression Inc iTVC16
> >> (CX23416) MPEG-2 Encoder (rev 01)
> >> Subsystem: Hauppauge computer works Inc. WinTV PVR 150
> >> Flags: bus master, medium devsel, latency 64, IRQ 217
> >> Memory at e8000000 (32-bit, prefetchable) [size=64M]
> >> Capabilities: [44] Power Management version
> >> xine -v
> >> This is xine (X11 gui) - a free video player v0.99.4.
> >> (c) 2000-2004 The xine Team.
> >> freevo:
> >> freevo-1.6.2
> >> ivtv:
> >> ivtv-0.7.3
> >> when i try to watch a tv-show live i get the following error in xine.
> >>
> >> the stream pvr://temp/xine-buf- use an unsupported codac.
> >>
> >> and then i can't come back to freevo.
> >> If i try to record something via freevo i get a file that is about 1GB per
> >> minute and its all nonsens
> >> .
> >> if i use cat /dev/video0 | xine stdin://mpeg2 & it works
> >> and i can switch channels with ivtv-tune -c 7
> >>
> >>
> >> the local_conf.py can be found here.
> >> http://holmberg.mine.nu/local_conf.py.txt
>
> It is possible that xine has not been compiled with pvr support. What
> you can do is to set CHILD_DEBUG and DEBUG then you get the command
> lines that Freevo executes. You can test these on the command line and
> drop the -sysctl option.
>
> Duncan
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Freevo-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
>
Mvh
Peter Holmberg
Linrepevägen 14
75648 Uppsala
Phone: +46(0)70 362 9491
Mail: [EMAIL PROTECTED]
Web: http://www.dextrin.se
----- End forwarded message -----
Mvh
Peter Holmberg
Linrepevägen 14
75648 Uppsala
Phone: +46(0)70 362 9491
Mail: [EMAIL PROTECTED]
Web: http://www.dextrin.se
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users