Well, downgrading to 8762 solved the problem! - TV is in full resolution
now! Through now it seems like my main CRT is refreshing weird. Vertical
refresh rate is still as before, but it more tiring to the eye...., smth
with screen redraw... Well, you can't have it all I guess :).
Vlad
On 5/29/07, Frank [Antispam account] <[EMAIL PROTECTED]> wrote:
Hi Vlad,
This is my setup (Fedora 5 based)
I'm running Freevo 1.7.3-svn with the Panorama-theme. Just one screen (my
widescreen (no HDTV) Sony tv) attached to the ASUS V7100 composite out.
[EMAIL PROTECTED] ~]# uname --all
Linux intranet.vanderstad.nl 2.6.20-1.2312.fc5 #1 Tue Apr 10 15:09:44 EDT
2007 i686 i686 i386 GNU/Linux
============================================================================
==========================================================================
[EMAIL PROTECTED] ~]# lspci
VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400]
(rev
b2)
============================================================================
==========================================================================
[EMAIL PROTECTED] ~]# rpm -qa | grep nvidia
xorg-x11-drv-nvidia-96xx-1.0.9631-5.lvn5
kmod-nvidia-96xx-1.0.9631-4.2.6.20_1.2312.fc5
============================================================================
==========================================================================
[EMAIL PROTECTED] ~]# more /etc/freevo/freevo.conf
cdparanoia = /usr/bin/cdparanoia
chanlist = europe-west
display = x11
fbxine = /usr/bin/fbxine
flac = /usr/bin/flac
geometry = 720x576
jpegtran = /usr/bin/jpegtran
lame = /usr/bin/lame
lsdvd = /usr/bin/lsdvd
mencoder = /usr/bin/mencoder
mplayer = /usr/bin/mplayer
renice = /usr/bin/renice
setterm = /usr/bin/setterm
tv = pal
version = 2.1
xine = /usr/bin/xine
============================================================================
==========================================================================
[EMAIL PROTECTED] ~]# more /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 ([EMAIL PROTECTED]) Mon Oct 16
22:13:07
PDT 2006
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "PAL Monitor"
Screen 0 "Screen_tv" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "crt"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of
the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/lib/xorg/modules/extensions/nvidia"
ModulePath "/usr/lib/xorg/modules"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "fbdevhw"
Load "record"
Load "freetype"
Load "type1"
Load "glx"
Load "dbe"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor 1024x768"
DisplaySize 800 600
HorizSync 31.5 - 57.0
VertRefresh 50.0 - 70.0
ModeLine "800x480" 35.0 800 856 1040 1056 480 480 486 488
+hsync
+vsync
ModeLine "1024x576" 70.0 1024 1055 1119 1328 576 608 632 741
+hsync +vsync
ModeLine "1280x720" 92.7 1280 1360 1440 1648 720 725 730 750
+hsync +vsync
Option "dpms"
# 800x480 @ 67Hz
EndSection
Section "Monitor"
Identifier "PAL Monitor TEST"
HorizSync 30.0 - 68.0
VertRefresh 50.0 - 120.0
ModeLine "720x576" 42.6 720 760 832 944 576 577 580 602 -hsync
-vsync
EndSection
Section "Monitor"
Identifier "PAL Monitor"
VendorName "Monitor Vendor"
ModelName "Monitor 800x600"
DisplaySize 800 600
HorizSync 31.0 - 50.0
VertRefresh 60.0 - 60.0
ModeLine "800x600" 35.0 800 856 1040 1056 480 480 486 488
+hsync
+vsync
Option "dpms"
# 800x480 @ 67Hz
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "nVidia"
BoardName "nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev
b2)"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Device"
Identifier "Card_tv"
Driver "nvidia"
VendorName "nVidia"
BoardName "nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev
b2)"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TVChipset" "1"
Option "TVSignal" "1"
Option "XvHsync" "0"
Option "XvVsync" "0"
Option "TVOverscan" "0"
SubSection "Display"
Viewport 0 0
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen_tv"
Device "Card_tv"
Monitor "PAL Monitor"
DefaultDepth 24
Option "TVChipset" "1"
Option "TVSignal" "1"
Option "XvHsync" "0"
Option "XvVsync" "0"
#Option "TVOverScan" "1.0"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-B"
Option "ConnectedMonitor" "TV"
SubSection "Display"
#Modes "1024x768" "800x600" "640x480"
#Modes "nvidia-auto-select" "1024x768" "800x600"
"640x480"
#Modes "1024x768" "810x613" "800x600" "768x576"
"720x576"
"640x480"
Viewport 0 0
Depth 24
Modes "768x576" "720x576" "640x480"
EndSubSection
EndSection
============================================================================
==========================================================================
________________________________
Van: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Namens Vlad Olenin
Verzonden: dinsdag 29 mei 2007 5:53
Aan: freevo-users@lists.sourceforge.net
Onderwerp: Re: [Freevo-users] TV output is on the extra low resolution?..
Thanks, Brian. I checked the settings you mentioned - have all of them in
place. Also confirmed by the X log that correct resolution is being
selected.
But interestingly I stumbled across the thread which mentions my problem:
http://www.nvnews.net/vbulletin/showthread.php?t=82141
Other people have the same problem (half resolution lost on TV-out /
interlace displayed incorrectly) with the particular version of NVidia
legacy driver: 9631 (this one is newer). The old one - 8762 - seems to
work
fine for people - will check it tomorrow:
----- QUOTE FROM THE THREAD ----
>> When I switched from 8762 to 9625 and every version from that point on,
TV out is no longer displayed in full interlace.
>> Instead of getting both odd and even fields, just one of the fields is
displayed for both fields and the result is a halving of the visible
resolution.
------ END OF QUOTE -------
What NVidia driver version are you guys using? I'm using 9631 for my MX
440
nvidia card and according to the thread this seems to be the problem.....
Vlad
On 5/28/07, Brian <[EMAIL PROTECTED]> wrote:
On Mon, 28 May 2007 21:51:50 -0400
"Vlad Olenin" <[EMAIL PROTECTED]> wrote:
> Actually, just rejuvenated SVIDEO output - still nothing. Looks
like
> it's not only video playback problem - the same 'pixelized'
output
is
> everywhere, eg, Freevo menus: the font is large enough, but
> 'fuzzy'... I'd hate to reinstall OS to try to fix this.....
>
> On 5/28/07, Vlad Olenin < [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> > wrote:
> >
> > Well, I'm officially puzzled... Booted into Windows XP and
played
> > DVD on TV from there - good, 'as DVD' quality (no squares,
etc).
> >
> > Reinstalled legacy drivers over the weekend from the NVidia
source (
> > Linux-x86-1.0-9631 ), using official NVidia installer,
uninstalling
> > first previously installed drivers. Everything works, checked
the X
> > log, screen IS initialized to 1024x768...:
> >
> > (II) NVIDIA(0): Assigned Display Device: TV-0
> > (II) NVIDIA(0): Requested modes:
> > (II) NVIDIA(0): "1024x768"
> > (II) NVIDIA(0): Validated modes:
> > (II) NVIDIA(0): MetaMode "1024x768":
> > (II) NVIDIA(0): Bounding Box: [0, 0, 1024, 768]
> > (II) NVIDIA(0): NVIDIA TV Encoder (TV-0): "1024x768"
> > (II) NVIDIA(0): Size : 1024 x 768
> > (II) NVIDIA(0): Offset : +0 +0
> > (II) NVIDIA(0): Panning Domain: @ 1024 x 768
> > (II) NVIDIA(0): Position : [0, 0, 1024, 768]
> > (II) NVIDIA(0): Virtual screen size determined to be 1024 x
768
> >
> > The quality though is still LOWER than the one I'm getting
from
> > under the Windows.
> >
<snip>
Are you sure you're using the right options in your xorg.conf file
?
I've got an older nvidia (iirc it's an mx400 32mb w/s-video out)
running nvidia's proprietary driver (not sure of the version) it
runs
freevo 1.7 fine.Aside form adjusting the overscan to make the
picture
fit the screen I didn't change a thing.I did use a preconfigured
xorg.conf on it I've been using for ages.The box it's in is a
setup
for my mom which I don't have access to unless I drive over there
(no inet).I'll post the relevant portions of my xorg.conf in the
hope it
might help.
Section "Device"
Identifier "nvidia1"
Driver "nvidia"
BusId "PCI:1:00:0"
Screen 1
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "NTSC-M"
Option "ConnectedMonitor" "CRT,TV"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
EndSection
Section "Screen"
Identifier "Screen1"
Device "nvidia1"
Monitor "TVout"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "640x480"
EndSubsection
EndSection
My guess is maybe you don't have the right option or resolution
set
for your TV if it's North American then you have to use the NTSC-M
option.From the nvidia drivers docs ...
o The "TVStandard" option should be added to your screen
section;
valid values are:
TVStandard Description
-------------
-------------------------------------------------- "PAL-B"
used in Belgium, Denmark, Finland, Germany, Guinea, Hong Kong,
India,
Indonesia, Italy, Malaysia, The Netherlands, Norway, Portugal,
Singapore, Spain, Sweden, and
Switzerland
"PAL-D" used in China and North Korea
"PAL-G" used in Denmark, Finland, Germany,
Italy,
Malaysia, The Netherlands, Norway,
Portugal,
Spain, Sweden, and Switzerland
"PAL-H" used in Belgium
"PAL-I" used in Hong Kong and The United Kingdom
"PAL-K1" used in Guinea
"PAL-M" used in Brazil
"PAL-N" used in France, Paraguay, and Uruguay
"PAL-NC" used in Argentina
"NTSC-J" used in Japan
"NTSC-M" used in Canada, Chile, Colombia, Costa
Rica,
Ecuador, Haiti, Honduras, Mexico,
Panama,
Puerto Rico, South Korea, Taiwan, United States of
America, and Venezuela
"HD480i" 480 line interlaced
"HD480p" 480 line progressive
"HD720p" 720 line progressive
"HD1080i" 1080 line interlaced
"HD1080p" 1080 line progressive
"HD576i" 576 line interlace
"HD576p" 576 line progressive
The line in your X config file should be something like:
Option "TVStandard" "NTSC-M"
If you do not specify a TVStandard, or you specify an invalid
value,
the default "NTSC-M" will be used. Note: if your country is not in
the
above list, select the country closest to your location.
Hope this helps you out.
Brian
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
<http://sourceforge.net/powerbar/db2/>
_______________________________________________
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users