I just tried with width=720 and height=576, but without success.
Any other idea for me to debug the situation (quick and dirty) ? :-)
2007/9/10, Duncan Webb <[EMAIL PROTECTED]>:
>
> > I can get fmt-video, but not set it.
> >
> > [EMAIL PROTECTED]:~# v4l2-ctl --set-fmt-video=width=768,height=576
> > ioctl: VIDIOC_S_FMT
>
> If you have connected this to a TV you will need to use 720x576 as the
> pixels are not square on a TV (4:3 aspect has 1.06667:1) 720x1.0667 = 768.
>
> Try this:
> v4l2-ctl --set-fmt-video=width=720,height=576
>
> > [EMAIL PROTECTED]:~# v4l2-ctl --get-fmt-video
> > Format:
> > Type : Video Capture
> > Width/Height : 320/240
> > Pixel Format : BGR3
> > Field : Interlaced
> > Bytes per Line: 960
> > Size Image : 230400
> > Colorspace : Unknown (00000000)
> >
> > Will try some googling about this problem too.
>
> Then you may need to set your geometry to 320x240.
>
> > Is there anything else that I could check in a bash shell to help me
> > correct
> > my HVR-1300 problem?
> > PS: I can change the resolution of my HVR display in TVTIME application.
>
> Colorspace seems a bit odd too.
>
> Duncan
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
