I found myself the solution to my issue:
My "Tuner_Type" variable inside local_conf.py was set to "external" instead
of "internal".
Now the freq is correctly set in the mplayer tvcmd variable.
Cheers,
--Pirlouwi.
2007/9/29, Pirlouwi <[EMAIL PROTECTED]>:
>
> Here is the childapp.py traceback when I push on an analog tv channel
> inside freevo:
>
> childapp.py (139): Running (str) " /usr/bin/mplayer -vo xv -ao
> oss:/dev/dsp -autosync 100 -nolirc -nojoystick -autoq 100 -screenw 720
> -screenh 576 -fs -slave -nocache tv:// -tv driver=v4l2:freq=
> 0.000:device=/dev/video0:input=0:norm=PAL:width=640:height=480:outfmt=yty2"
> in shell with pid 6988 priority -5
>
> I do not see the tv channel on screen, only white noise.
> This is normal because the mplayer freq is set to 0.000 (when I replace
> 0.000 by 55.250 for example, the tv picture is well displayed.
> I suppose this is not a bug, but I don't know what config error I made.
>
> Could someone lead me to the solution?
>
> PS:
> my config is, quickly said is :
>
> CONF.chanlist=europe-west
> Tuner_norm=PAL
> group_type='normal'
> TV_CHANNELS = [ (' TF11.kazer.org', 'TF1', 'E5'), ( 'FRA2.kazer.org',
> 'FR2', 'E7')]
>
> Take care,
> _Pirlouwi_
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users
