On Sun, 13 Jan 2008, Elizabeth Dodd wrote:
> My TV card is overheating, its midsummer and here that means 40C. So I
> thought I'd sort out autoshutdown for my box and that would deal with the
> overheating.
> I finally configured the nvram-wakeup and got that debugged.
>
> In Freevo 1.7.5 I have setup the autoshutdown.
>
> But autoshutdown is only calling RESTART instead of HALT
> I've fooled around with various parameters in local_conf.py and shown to my
> satisfaction that if RESTART_CMD='sudo shutdown -r now' is commented out
> the box is not shutdown, and SHUTDOWN_CMD='sudo shutdown -h now' is not
> called at all.
> Has anyone solved this problem?
>
> (this makes a neat party trick, rebooting the box, but isn't going to solve
> the heat issue)
found the answer
You must set the following to True or False, as the plugin assumes True if not
set.
AUTOSHUTDOWN_BIOS_NEEDS_REBOOT=True
so i've fixed that info in the wiki
--
Overboarding:
Overcompensating for fears about the future by plunging
headlong into a job or life-style seemingly unrelated to one's
previous life interests: i.e., Amway sales, aerobics, the Republican
party, a career in law, cults, McJobs....
-- Douglas Coupland, "Generation X: Tales for an Accelerated
Culture"
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
