Am Freitag, 5. September 2008 15.38:01 schrieb [EMAIL PROTECTED]: > Le Fri, 5 Sep 2008 11:16:17 +0200 (CEST), > "Andreas Dick" <[EMAIL PROTECTED]> a écrit : > > thanks > > > changing the mode will chang pulses with spaces > > [EMAIL PROTECTED] patrick]# killall lircd > [EMAIL PROTECTED] patrick]# rmmod lirc_serial > [EMAIL PROTECTED] patrick]# modprobe lirc_serial sense=0 > [EMAIL PROTECTED] patrick]# mode2 -d /dev/lirc/0 > pulse 2215268 > space 8526 > pulse 4138 > space 609 > pulse 1500 > space 611 > pulse 1502 > space 608 > pulse 447 > space 608 > pulse 448 > space 610 > pulse 1499 > space 610 > pulse 447 > space 607 > pulse 1503 > space 609 > pulse 1503 > space 608 > pulse 445 > space 611 > pulse 446 > space 608 > pulse 1504 > space 607 > pulse 1502 > space 609 > pulse 446 > space 611 > pulse 445 > space 609 > pulse 447 > space 610 > pulse 444 > space 610 > pulse 21351 > space 630 > pulse 1486 > space 630 > pulse 1483 > space 604 > pulse 446 > space 608 > pulse 447 > space 609 > pulse 1502 > space 609 > pulse 446 > space 609 > pulse 1503 > space 608 > pulse 1502 > space 608 > pulse 446 > space 609 > pulse 447 > space 609 > pulse 1502 > space 610 > pulse 1501 > space 611 > pulse 444 > space 608 > pulse 448 > space 609 > pulse 445 > space 611 > pulse 446 > space 633 > pulse 21702 > space 608 > pulse 1501 > space 609 > pulse 1503 > space 608 > pulse 445 > space 610 > pulse 447 > space 608 > pulse 1502 > space 609 > pulse 447 > space 608 > pulse 1503 > space 609 > pulse 1501 > space 611 > pulse 444 > space 633 > pulse 423 > space 609 > pulse 1502 > space 609 > pulse 1501 > space 611 > pulse 444 > space 610 > pulse 447 > space 607 > pulse 448 > space 609 > pulse 446 > space 609 > pulse 21733 > space 602 > pulse 1499 > space 610 > pulse 1503 > space 608 > pulse 446 > space 609 > pulse 446 > space 610 > pulse 1502 > space 608 > pulse 447 > space 608 > pulse 1503 > space 608 > pulse 1502 > space 610 > pulse 446 > space 607 > pulse 448 > space 609 > pulse 1501 > space 610 > pulse 1501 > space 609 > pulse 446 > space 610 > pulse 446 > space 609 > pulse 447 > space 608 > pulse 446 > space 610 > pulse 21732 > space 602 > pulse 1501 > space 610 > pulse 1502 > space 608 > pulse 446 > space 608 > pulse 448 > space 609 > pulse 1502 > space 608 > pulse 447 > space 608 > pulse 1503 > space 608 > pulse 1502 > space 610 > pulse 446 > space 608 > pulse 447 > space 609 > pulse 1502 > space 608 > pulse 1502 > space 610 > pulse 445 > space 608 > pulse 448 > space 609 > pulse 446 > space 611 > pulse 446 > space 607 hei. if you compare the numbers here, they seems matching the ones in a normal RC5 config file: > one 610 1500 > zero 610 444
> > [EMAIL PROTECTED] patrick]# dmesg | grep lirc > lirc_dev: IR Remote Control driver registered, major 61 > lirc_serial: auto-detected active low receiver > lirc_dev: lirc_register_plugin: sample_rate: 0 > lirc_serial: Manually using active high receiver > lirc_dev: lirc_register_plugin: sample_rate: 0 > lirc_serial: ignoring spike: 1 0 48baaea5 48baaea5 1600f 15feb > [EMAIL PROTECTED] patrick]# > > > > > # Please make this file available to others > # by sending it to <[EMAIL PROTECTED]> > # > # this config file was automatically generated > # using lirc-0.8.3-CVS(default) on Sun Aug 31 12:13:11 2008 > # > # contributed by > # > # brand: /home/patrick/lircd.conf > # model no. of remote control: > # devices being controlled by this remote: > # > > begin remote > > name JVC RM-V720U > bits 8 > flags SPACE_ENC|NO_HEAD_REP|CONST_LENGTH > eps 30 > aeps 100 > > header 8525 4139 > one 610 1500 > zero 610 444 > ptrail 609 > pre_data_bits 8 > pre_data 0xCB > gap 46603 > min_repeat 6 > toggle_bit_mask 0x0 > > begin codes > pause 0xB0 > slowgauche 0xA0 > slowdroit 0x10 > play 0x30 > retour 0xE0 > avance 0x60 > stop 0xC0 > start/stop 0x9A > end codes > > end remote > > > it's appear ok no ? > not sure i understand good . is this lircd.conf working? start lircd and usw irw to check. else try to build your own now with irrecord as described allready. this should find now a valid pattern Andreas ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users
