I added VCR_CMD = /dev/video1 and only got errors. This is in fact where dmesg show the HDPVR coming through, /dev/video0 is the built in webcam.I still believe this problem is tied to the Freevo recordserver needing a channel conf. in order to start. The channel conf is telling Freevo to record from a channel that doesn't exist with this device. If I remove the channel conf or try to trick it with a false entry, it simply won't start. So, I'm stuck with a Catch 22 situation. VCR_CMD doesn't seem to work as a workaround for this problem. I've tried over a dozen different hacks to the local_conf.py and no luck so far. If you can think of any other commands or a way to get Freevo to record without a channel conf, I'd love to know.For now, I'll just stick with using the cat /dev/video1>(filename) command to record. It's the only one that works every time.
--- On Thu, 6/4/09, Evan Hisey <ehi...@gmail.com> wrote: > From: Evan Hisey <ehi...@gmail.com> > Subject: Re: [Freevo-users] Configuring HD PVR with Freevo 1.90 > To: freevo-users@lists.sourceforge.net > Date: Thursday, June 4, 2009, 9:18 AM > On Thu, Jun 4, 2009 at 12:24 AM, Phil > Raymond <tvp...@yahoo.com> > wrote: > > > > I tried several combinations of local conf commands, > nothing has worked yet.Although I did get the HDPVR device > to light up blue for one second when it started one of the > recordings I programmed, so I think I'm closeap. > > Perhaps the next version of Freevo could offer an > option of recording from usb without a channel conf? > Channels are set with the cable remote, since I'm recording > the output of the box and I always use manual record, I > don't need a channel conf. Anyway,here's the last local conf > I used.... > > > > CONFIG_VERSION = 5.27 > > TV_RECORD_DIR = '/home/tvphil/Videos' > > TV_CHANNELS = ('comcast','comcast','NAusb') > > TV_DRIVER = 'v4l2' > > TV_DEVICE = 'cat /dev/video1' > > TV_INPUT = 1 > > TV_REC_SIZE = (1920, 1080) > > TV_RECORD_FILE_SUFFIX = '.mpg' > > CHILDAPP_DEBUG = 1 > > > What do you have for theĀ 'VCR_CMD='? This will be the > one you need to > configure to get the recording to work. I had to modify it > to get a > WinTVgo card to record. The http://doc.freevo.org/AnalogueTvTypes page > should give you a could idea how to setup the VCR_CMD=. The > pafe is > for analog devices, but mencoder is mencoder regardless of > input > source. > > Evan > > ------------------------------------------------------------------------------ > OpenSolaris 2009.06 is a cutting edge operating system for > enterprises > looking to deploy the next generation of Solaris that > includes the latest > innovations from Sun and the OpenSource community. Download > a copy and > enjoy capabilities such as Networking, Storage and > Virtualization. > Go to: http://p.sf.net/sfu/opensolaris-get > _______________________________________________ > Freevo-users mailing list > Freevo-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freevo-users > ------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Freevo-users mailing list Freevo-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freevo-users