On Thu, Nov 16, 2006 at 09:05:12PM +0000, Sven Geggus wrote: > Sven Geggus <[EMAIL PROTECTED]> wrote: > > > [EMAIL PROTECTED]:~# nas -P /tmp/nas.lan.pid -H 34954 -i eth1 -S -m 64 -k > > <pre-shared-key> -s <my-essid> -w AES -g 3600 > > eth1: ignore i/f due to error(s) > > *argl* "-w AES" was bogus of course: > > This is what I get: > [EMAIL PROTECTED]:~# nas -P /tmp/nas.lan.pid -H 34954 -i eth1 -S -m 128 -k > <pre-shared-key> -s <my-essid> -w 4 -g 3600 > sta_info > [EMAIL PROTECTED]:/# ifconfig eth1 > eth1 Link encap:Ethernet HWaddr 00:13:D4:D1:FB:D8 > inet addr:192.168.4.10 Bcast:0.0.0.0 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:14 errors:0 dropped:0 overruns:0 frame:23 > TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:1467 (1.4 KiB) TX bytes:1479 (1.4 KiB) > Interrupt:2 Base address:0x4000 > [EMAIL PROTECTED]:/# iwconfig eth1 > eth1 IEEE 802.11-DS ESSID:"<my-essid>" > Mode:Managed Frequency:2.412 GHz Access Point: 00:0E:2E:74:3C:3A > Tx-Power:19 dBm > RTS thr=2347 B Fragment thr=2346 B > Encryption key:4380-1E33-53EB-D5E5-887F-0287-703C-E168 [3] > Link Signal level:-44 dBm Noise level:-97 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > > On the Access-Point I get: > Nov 16 22:01:03 ultimate100 hostapd: ath0: STA 00:13:d4:d1:fb:d8 IEEE 802.11: > associated > Nov 16 22:01:03 ultimate100 hostapd: ath0: STA 00:13:d4:d1:fb:d8 WPA: > pairwise key handshake completed (RSN) > > In other words: _It works fine now_
For me it doesn't work with WPA-PSK/PSK/TKIP. Can you try to test this? Dirk _______________________________________________ freewrt-developers mailing list [email protected] https://www.freewrt.org/lists/listinfo/freewrt-developers
