Hi Waldemar, || On Thu, 21 Dec 2006 23:41:58 +0100 || Waldemar Brodkorb <[EMAIL PROTECTED]> wrote:
>> So nothing except ping works. This looks like the failsafe mode is >> defective or the documentation is wrong. wb> There is one problem with failsafe on jffs2 root filesystem. If wb> you accidently remove or corrupt the ip or nvram utility on jffs2 wb> filesystem, then your installation is unrecoverable. I very certaily did not touch the ip or nvram utilities, only screwed up the /etc/network/interfaces. >> on the devices? Could you per chance provide an image that (when >> flashed onto the devices) could do this job as an alternative >> resort for when the failsafe mode fails? wb> The best solution in this case, is just to install the original wb> firmware from Asus. This will delete all components of FreeWRT. wb> After that you can start with a fresh installation from scratch. Ah. Could have thought of that myself. Thanks a lot for the pointer. wb> Please report back if you have used jffs2 as root. Otherwise I wb> will be very surprised. In that case I may have a surprise for you, here is the start of the .config file: # # Automatically generated make config: don't edit # MODULES=y FWRT_HAVE_DOT_CONFIG=y FWRT_mipsel=y FWRT_ARCH="mipsel" FWRT_WGET="wget --passive-ftp -nd" FWRT_JLEVEL=1 FWRT_LINUX_2_4_BRCM=y # # Target system (Broadcom) # # FWRT_LINUX_2_4_BRCM_ASUS_WL500G is not set # FWRT_LINUX_2_4_BRCM_ASUS_WL500G_DELUXE is not set FWRT_LINUX_2_4_BRCM_ASUS_WL500G_PREMIUM=y # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54G_1_0 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54G_1_1 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54G_2_0 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54G_2_2 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54G_3_0 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54G_3_1 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54G_4 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54GS_1_0 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54GS_1_1 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54GS_4 is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54GL is not set # FWRT_LINUX_2_4_BRCM_LINKSYS_WRT54G3G is not set # FWRT_LINUX_2_4_BRCM_NETGEAR_WGT634U is not set # FWRT_TARGET_ROOTFS_JFFS2 is not set # FWRT_TARGET_ROOTFS_SQUASHFS_SYMLINKS is not set FWRT_TARGET_ROOTFS_SQUASHFS_OVERLAY=y Regards, Georg -- Georg C. F. Greve <[EMAIL PROTECTED]> Free Software Foundation Europe (http://fsfeurope.org) Join the Fellowship and protect your freedom! (http://www.fsfe.org) What everyone should know about DRM (http://DRM.info)
pgpwkq9j1f1g6.pgp
Description: PGP signature
_______________________________________________ freewrt-users mailing list [email protected] https://www.freewrt.org/lists/listinfo/freewrt-users
