Hi Chris,
On Fri, 19 Jan 2007 at 10:58 +0100, Christian Ney wrote:
> Hi list,
>
> First of all, congrats for the latest release.
Thanks.
> Currently I'm planning to replace an old OpenWRT on my WRT54GL with
> FreeWRT. As I couldn't find anything more specific about VLAN
> configuration, I wondered how / if VLAN trunking is possible with
> it, e.g.:
VLAN trunking is possible.
> - Port 0 ("external") is connected to a DMZ
> - Port 1 is connected to an OpenBSD firewall LAN interface
> - the firewall shall be given a VLAN interface (tagged VLAN-ID 1)
> - both LAN and DMZ shall now be directed to the firewall
What exactly you mean with directed to the firewall?
If you want to mark a physical port as tagged, you need to add a "t"
to the port number.
auto eth0.1
iface eth0.1 inet static
address 10.0.0.2
netmask 255.255.255.0
switch-ports 1t 5
VLAN trunking is a little bit untested, (the driver will work, but
the pre-up script might need some finetuning) use ifup -v and
take a look at /etc/network/if-pre-up/vlan.
Be familiar with failsafe mode, before you start ;)
good luck
Waldemar
--
don't open your wrt, free it
http://www.freewrt.org
_______________________________________________
freewrt-users mailing list
[email protected]
https://www.freewrt.org/lists/listinfo/freewrt-users
