Hello list,
I'm failing to install FreeWRT on my WRT54g v1.1 -- I tried images from wib and I compiled my own, no succsess so far. The first thing I tried was the tftp method -- after transfer the system rebooted (i see the "192.168.1.1.2048 > 192.168.1.255.4919: UDP, length 1001" thing) -- but nothing happends after that. The next thing I did was to install OpenWRT, cleanup nvram and install FreeWRT using the mtd method described in the handbook. No succsess -- it seems WreeWRT is written into the flash, the system reboots but does not come up :( After that procedure I reinstalled OpenWRT -- some potentially interesting information: -- root@(none):/# nvram show os_ram_addr=80001000 et0macaddr=00:06:25:FF:7A:CD boot_wait=on et0mdcport=0 Intel_firmware_version=v1.41.8 pmon_ver=PMON 3.31.15.0 restore_defaults=1 os_flash_addr=bfc40000 boardtype=bcm94710dev et1macaddr=00:06:25:FF:7A:CE et1mdcport=1 flash_type=Intel 28F320C3 2Mx16 BotB clkfreq=125 firmware_version=v1.42.2 sdram_config=0x0000 scratch=a0180000 sdram_refresh=0x8040 sdram_ncdl=0x00000000 et0phyaddr=30 sdram_init=0x0419 boot_date=Fri Sep 26 00:34:47 2003 dl_ram_addr=a0001000 et1phyaddr=30 boot_ver=v1.5 boardnum=42 size: 539 bytes (32229 left) -- and a small portion from dmesg: [..] cfi_cmdset_0001: Erase suspend on write enabled 0: offset=0x0,size=0x2000,blocks=8 1: offset=0x10000,size=0x10000,blocks=63 Using word write method Flash device: 0x400000 at 0x1fc00000 bootloader size: 262144 Physically mapped flash: Filesystem type: squashfs, size=0xfb158 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "cfe" 0x00040000-0x003f0000 : "linux" 0x000be400-0x001c0000 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 0x003f0000-0x00400000 : "nvram" 0x001c0000-0x003f0000 : "OpenWrt" Initializing Cryptographic API [..] Any ideas? j. _______________________________________________ freewrt-users mailing list [email protected] https://www.freewrt.org/lists/listinfo/freewrt-users
