Hello together since last week i try to run FreeWRT on my wl-500gP. The installation works fine but now I running in big problems with WLAN configuration and now I
need your help ! >From client side it ist possible to connect to the WLAN but I can not ping the router ip. (timeout) Here are my config files: <interfaces> # basic network configuration file # for more information, see the FreeWRT handbook # http://www.freewrt.org/trac/wiki/Documentation/Handbook auto lo iface lo inet loopback # LAN ports auto eth0.0 iface eth0.0 inet static address 192.168.1.1 netmask 255.255.255.0 broadcast + switch-ports 1 2 3 4 5* # WAN port: PPPoE auto eth0.1 iface eth0.1 inet manual switch-ports 0 5 auto ppp0 iface ppp0 inet ppp use-template dsl provider t-online ppp-username "[EMAIL PROTECTED]" ppp-password "password" ppp-device eth0.1 # WLAN with WPA2, MAC-Filter and WLAN-Speedup auto eth2 iface eth2 inet static address 192.168.11.1 netmask 255.255.255.0 broadcast 192.168.11.255 wireless-type broadcom wireless-country DE wireless-mode ap wireless-ssid gudtest wireless-channel 11 wireless-security wpa-psk wireless-authorization psk psk2 wireless-encryption aes+tkip wireless-wpa-key 12345678 wireless-macmode 0 wireless-mac 00:13:02:33:f2:ce 06:07:08:09:0a:0b wireless-gmode performance wireless-frameburst 1 wireless-afterburner 1 </interfaces> The output of ip address shows this: <ip address show> 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:18:f3:98:e3:6e brd ff:ff:ff:ff:ff:ff 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 link/ether 40:10:18:00:00:2d brd ff:ff:ff:ff:ff:ff 4: eth2: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:18:f3:98:e3:6e brd ff:ff:ff:ff:ff:ff inet 192.168.11.1/24 brd 192.168.11.255 scope global eth2 5: eth0.0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue link/ether 00:18:f3:98:e3:6e brd ff:ff:ff:ff:ff:ff inet 192.168.1.1/24 brd 192.168.1.255 scope global eth0.0 6: eth0.1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue link/ether 00:18:f3:98:e3:6e brd ff:ff:ff:ff:ff:ff </ip address show> iwconfig shows this: <iwconfig eth2> eth2 IEEE 802.11-DS ESSID:"gudtest" Mode:Master Frequency:2.462 GHz Access Point: 00:18:F3:98:E3:6E Tx-Power:19 dBm RTS thr=2347 B Fragment thr=2346 B Encryption key:off </iwconfig eth2> It try this with many other WLAN configurations (Ad-Hoc with no encryption) but every time I had the same effect ! Maybe it is possible that I forget to install an important package ? <installed packages> base-files - 1.0-16 - base-files-brcm-2.4-asus-wl500g-premium-squashfs-overlay - 1.0-7 - bridge-utils - 1.0.6-1 - broadcom-nas - 2 - broadcom-wl-util - 0.1-2 - busybox - 1.1.3-7 - dhcp-server - 3.0.3-2 - dnsmasq - 2.38-1 - dropbear - 0.48.1-2 - ez-ipupdate - 3.0.11b8-2 - fwcf - 1.01-1 - iptables - 1.3.6-3 - jffs2root - 1.0-1 - kmod-broadcom-diag - 2.4.33.3-brcm-1.0-1 - kmod-broadcom-wl - 2.4.33.3-brcm-1 - kmod-fs-ext3 - 2.4.33.3-brcm-1 - kmod-fs-vfat - 2.4.33.3-brcm-1 - kmod-fs-xfs - 2.4.33.3-brcm-1 - kmod-gre - 2.4.33.3-brcm-1 - kmod-ppp - 2.4.33.3-brcm-1 - kmod-pppoe - 2.4.33.3-brcm-1 - kmod-switch-core - 2.4.33.3-brcm-0.1-2 - kmod-switch-robo - 2.4.33.3-brcm-0.1-2 - kmod-usb-core - 2.4.33.3-brcm-1 - kmod-usb-ohci - 2.4.33.3-brcm-1 - kmod-usb-uhci - 2.4.33.3-brcm-1 - kmod-usb2 - 2.4.33.3-brcm-1 - kmod-wlcompat - 2.4.33.3-brcm-1.0-3 - libncurses - 5.2-11 - libopenssl - 0.9.8d-1 - mtd - 1.0-5 - nano - 2.0.3-1 - nvram - 1.0-1 - openntpd - 3.9p1-1 - ppp - 2.4.3-8 - ppp-mod-pppoe - 2.4.3-8 - pptp - 1.6.0-3 - uclibc - 0.9.28-16 - wireless-tools - 28-1 - wpa-supplicant - 0.5.6-1 - Done. </installed packages> I hope that you can help me to solve my problems. Thank you and best regards Guido PS: During my tests I find another problem which I can solve for myself. Here is problem and solution: I could not connect to my internetprovider with ppp until I changed lcp-echo- interval from 10 to 60 <t-online> plugin rp-pppoe.so defaultroute usepeerdns lcp-echo-interval 60 lcp-echo-failure 3 persist maxfail 0 user "[EMAIL PROTECTED]" password "password" eth0.1 </t-online> ------------------------------------------------- debitel.net Webmail _______________________________________________ freewrt-users mailing list [email protected] https://www.freewrt.org/lists/listinfo/freewrt-users
