Hello,
I recently discovered FreeWRT. The ADK is excellent and building works
great. The final product looks much better than OpenWRT and it seems
cleaner and more logical.
I would *really* want to use it. However, I simply can't seem to make
it work. I have a plain ADSL modem and WRT54GL. ADSL modem is reset to
defaults and connected to the router. That is all I need. LAN, PPPoE,
and wireless. Bridged if possible to simplify transition to FreeWRT. I
currently run OpenWRT Kamikaze, and previously I run everything from
official to Tomato.
Now, I'm not 100% sure about the correct configurations I tried, but
I'll try to recreate it here. Also, if anybody have the same setup,
and it is working for them, please share.
This is what I have tried (among the other various configurations):
auto eth0.0
iface eth0.0 inet manual
switch-ports 1 2 3 4 5*
auto eth0.1
iface eth0.1 inet manual
switch-ports 0 5
auto ppp0
iface ppp0 inet ppp
use-template dsl
provider <name>
ppp-username <username>
ppp-password <password>
ppp-device eth0.1
auto eth1
iface eth1 inet manual
wireless-type broadcom
wireless-mode ap
wireless-ssid <ssid>
wireless-country HR
wireless-security wpa-psk
wireless-authorization psk2
wireless-encryption aes
wireless-wpa-key <key>
# wireless-macmode 2
# wireless-maclist "1 2 3"
wireless-channel 7
wireless-txpower 42
wireless-bridge-if br0
auto br0
iface br0 inet static
bridge-ifaces eth0.0 eth1
address 192.168.1.1
netmask 255.255.255.0
I also tried switch-ports 0 1 2 3 5* for eth0.0 and 4 5 for eth0.1 but
with no luck.
PPPoE doesn't seem to work. There is no resolv.conf created. I used
firmware image from WIB with template "WLAN Router for DSL with
PPPoE". I also created image from source, tried them both with the
same results. I really don't know where to look further…
Thanks,
- Šime
_______________________________________________
freewrt-users mailing list
[email protected]
https://www.freewrt.org/lists/listinfo/freewrt-users
