On Tue, Nov 20, 2007 at 09:06:49PM +0100, Adalbert Prokop wrote: > Phil Sutter schrieb am Dienstag, 20. November 2007: > > > > I'd like to signal certain states of my Asus WL500GP without having > > > to login into it first. I thought about someting like blinking the > > > power LED (or any other LED...) > > > You could simply use some shell script like the following: > > | LED=/proc/diag/led/power > > That's the crucial point: I do not have this file. :-/ I also had this > idea, but the only things that sounds reasonable is /proc/sys/diag which > is 0. I've tried some values from 0x01 to 0x20, but though they are > written there is no direct effect to be seen. > > Until now I did not even find an explanation what this file is for and > it's values.
Yes, the /proc interface for the led's did change lately. It all depends on the release/version of FreeWRT you are using. Although this might not be a solution for you, the source is often the best resource of documentation. ;) Greetings, Phil _______________________________________________ freewrt-users mailing list [email protected] https://www.freewrt.org/lists/listinfo/freewrt-users
