Hi, Am 26.09.2012 22:51, schrieb Marius Cirsta: > Everything works fine, thanks ryuo. > > There are 2 issues but these are not new. > > 1. There seems to be a file error or something showing up just before > grub2 loads but I can't quite read it before the grub2 screen comes > up. doesn't seem to affect anything though I can confirm this. It seems grub is missing 3 files, at least I see 3 different "file not found" messages. Also I see the localized version of "Press any key to continue" after selecting an entry. But this was also the case before I updated using ryu0s repo.
> 2. There's an error about amd microcode failing to load : > > asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9 > asus_wmi: SFUN value: 0x0<6>input: Eee PC WMI hotkeys as > /devices/platform/eeepc-wmi/input/input8 > microcode: CPU0: patch_level=0x010000bf > microcode: failed to load file amd-ucode/microcode_amd.bin > microcode: CPU1: patch_level=0x010000bf > microcode: failed to load file amd-ucode/microcode_amd.bin > microcode: CPU2: patch_level=0x010000bf > microcode: failed to load file amd-ucode/microcode_amd.bin > microcode: CPU3: patch_level=0x010000bf > microcode: failed to load file amd-ucode/microcode_amd.bin > microcode: CPU4: patch_level=0x010000bf > microcode: failed to load file amd-ucode/microcode_amd.bin > microcode: CPU5: patch_level=0x010000bf > microcode: failed to load file amd-ucode/microcode_amd.bin > microcode: Microcode Update Driver: v2.00 > <[email protected]>, Peter Oruba > > > I have a Phenom II X6 CPU. You need package amd-ucode. No need for reboot, a simple "modprobe -r microcode && modprobe microcode" will be sufficient. Greetings DeX _______________________________________________ Frugalware-devel mailing list [email protected] http://frugalware.org/mailman/listinfo/frugalware-devel
