Git-Url: 
http://git.frugalware.org/gitweb/gitweb.cgi?p=frugalware-current.git;a=commitdiff;h=683154bbfd78cb26e85d123c572f6c83cae1f6ac

commit 683154bbfd78cb26e85d123c572f6c83cae1f6ac
Author: crazy <[email protected]>
Date:   Wed Mar 15 22:32:06 2017 +0100

u-boot-2012.10-1-x86_64
* removed

diff --git a/source/base-extra/u-boot/FrugalBuild 
b/source/base-extra/u-boot/FrugalBuild
deleted file mode 100644
index d49d399..0000000
--- a/source/base-extra/u-boot/FrugalBuild
+++ /dev/null
@@ -1,75 +0,0 @@
-# Compiling Time: 0.20 SBU
-# Maintainer: Elentir <[email protected]>
-
-pkgname=u-boot
-pkgver=2012.10
-pkgrel=1
-pkgdesc="A boot loader for embedded systems"
-archs=('x86_64')
-depends=()
-url="http://www.denx.de/wiki/U-Boot";
-groups=('base-extra')
-source=(ftp://ftp.denx.de/pub/$pkgname/$pkgname-$pkgver.tar.bz2 \
-       mach-dockstar.patch)
-_F_archive_grepv="rc"
-up2date="Flasttar ftp://ftp.denx.de/pub/u-boot/";
-sha1sums=('80bc5f6d3e518803c9320d480e693fe1cb76a494' \
-          '0dc18ce594d17e044e2e66cf416252b3490add28')
-export LDFLAGS=""
-
-subpkgs=('u-boot-tools')
-subdescs=('Tools for Das U-Boot')
-subdepends=('')
-subgroups=('apps-extra')
-subarchs=('x86_64')
-
-build() {
-  Fcd
-  Fpatchall
-
-  make rpi_b_config || Fdie
-  make all || Fdie
-  Fmkdir usr/lib/u-boot/raspberrypi
-  Finstall 644 $_F_cd_path/u-boot usr/lib/u-boot/raspberrypi/u-boot.elf
-  Finstall 644 $_F_cd_path/u-boot.{bin,srec} usr/lib/u-boot/raspberrypi/
-  Finstall 644 $_F_cd_path/System.map usr/lib/u-boot/raspberrypi/
-
-  make distclean
-  make sheevaplug_config || Fdie
-  make all || Fdie
-  make u-boot.kwb || Fdie
-  Fmkdir usr/lib/u-boot/sheevaplug
-  Finstall 644 $_F_cd_path/u-boot usr/lib/u-boot/sheevaplug/u-boot.elf
-  Finstall 644 $_F_cd_path/u-boot.{kwb,bin,srec} usr/lib/u-boot/sheevaplug/
-  Finstall 644 $_F_cd_path/System.map usr/lib/u-boot/sheevaplug/
-
-  make distclean
-  make guruplug_config || Fdie
-  make all || Fdie
-  make u-boot.kwb || Fdie
-  Fmkdir usr/lib/u-boot/guruplug
-  Finstall 644 $_F_cd_path/u-boot usr/lib/u-boot/guruplug/u-boot.elf
-  Finstall 644 $_F_cd_path/u-boot.{kwb,bin,srec} usr/lib/u-boot/guruplug/
-  Finstall 644 $_F_cd_path/System.map usr/lib/u-boot/guruplug/
-
-  make distclean
-  make dockstar_config || Fdie
-  make all || Fdie
-  make u-boot.kwb || Fdie
-  Fmkdir usr/lib/u-boot/dockstar
-  Finstall 644 $_F_cd_path/u-boot usr/lib/u-boot/dockstar/u-boot.elf
-  Finstall 644 $_F_cd_path/u-boot.{kwb,bin,srec} usr/lib/u-boot/dockstar/
-  Finstall 644 $_F_cd_path/System.map usr/lib/u-boot/dockstar/
-
-  make CONFIG_CMD_LOADS=y tools-all || Fdie
-
-  Fmkdir usr/bin
-  Finstall 755 $pkgname-$pkgver/tools/mkimage usr/bin/
-  Finstall 755 
$pkgname-$pkgver/tools/{bmp_logo,gen_eth_addr,img2srec,env/fw_printenv,easylogo/easylogo}
 usr/bin/
-  Fmkdir etc/
-  Finstall 644 $pkgname-$pkgver/tools/env/fw_env.config etc/
-  Fln /usr/bin/fw_printenv /usr/bin/fw_setenv
-
-  Fsplit u-boot-tools usr/bin/
-  Fsplit u-boot-tools etc/
-}
diff --git a/source/base-extra/u-boot/mach-dockstar.patch 
b/source/base-extra/u-boot/mach-dockstar.patch
deleted file mode 100644
index e96e98c..0000000
--- a/source/base-extra/u-boot/mach-dockstar.patch
+++ /dev/null
@@ -1,922 +0,0 @@
-diff -Naur u-boot-2010.09.orig/board/Marvell/dockstar/config.mk 
u-boot-2010.09.new/board/Marvell/dockstar/config.mk
---- u-boot-2010.09.orig/board/Marvell/dockstar/config.mk       1969-12-31 
19:00:00.000000000 -0500
-+++ u-boot-2010.09.new/board/Marvell/dockstar/config.mk        2010-10-22 
11:27:19.000000000 -0400
-@@ -0,0 +1,28 @@
-+#
-+# (C) Copyright 2009
-+# Marvell Semiconductor <www.marvell.com>
-+# Written-by: Prafulla Wadaskar <[email protected]>
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-+# MA 02110-1301 USA
-+#
-+
-+TEXT_BASE = 0x00600000
-+
-+# Kirkwood Boot Image configuration file
-+KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
-diff -Naur u-boot-2010.09.orig/board/Marvell/dockstar/dockstar.c 
u-boot-2010.09.new/board/Marvell/dockstar/dockstar.c
---- u-boot-2010.09.orig/board/Marvell/dockstar/dockstar.c      1969-12-31 
19:00:00.000000000 -0500
-+++ u-boot-2010.09.new/board/Marvell/dockstar/dockstar.c       2010-10-22 
11:27:19.000000000 -0400
-@@ -0,0 +1,354 @@
-+/*
-+ * (C) Copyright 2009
-+ * Marvell Semiconductor <www.marvell.com>
-+ * Written-by: Prafulla Wadaskar <[email protected]>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-+ * MA 02110-1301 USA
-+ */
-+
-+#include <common.h>
-+#include <miiphy.h>
-+#include <asm/arch/kirkwood.h>
-+#include <asm/arch/mpp.h>
-+#include <linux/ctype.h> /* isspace */
-+#include <status_led.h>
-+#include "dockstar.h"
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+int board_init(void)
-+{
-+      /*
-+       * default gpio configuration
-+       * There are maximum 64 gpios controlled through 2 sets of registers
-+       * the  below configuration configures mainly initial LED status
-+       */
-+      kw_config_gpio(DOCKSTAR_OE_VAL_LOW,
-+                      DOCKSTAR_OE_VAL_HIGH,
-+                      DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
-+
-+      /* Multi-Purpose Pins Functionality configuration */
-+      u32 kwmpp_config[] = {
-+              MPP0_NF_IO2,
-+              MPP1_NF_IO3,
-+              MPP2_NF_IO4,
-+              MPP3_NF_IO5,
-+              MPP4_NF_IO6,
-+              MPP5_NF_IO7,
-+              MPP6_SYSRST_OUTn,
-+              MPP7_GPO,
-+              MPP8_UART0_RTS,
-+              MPP9_UART0_CTS,
-+              MPP10_UART0_TXD,
-+              MPP11_UART0_RXD,
-+              MPP12_SD_CLK,
-+              MPP13_SD_CMD,
-+              MPP14_SD_D0,
-+              MPP15_SD_D1,
-+              MPP16_SD_D2,
-+              MPP17_SD_D3,
-+              MPP18_NF_IO0,
-+              MPP19_NF_IO1,
-+              MPP20_GPIO,
-+              MPP21_GPIO,
-+              MPP22_GPIO,
-+              MPP23_GPIO,
-+              MPP24_GPIO,
-+              MPP25_GPIO,
-+              MPP26_GPIO,
-+              MPP27_GPIO,
-+              MPP28_GPIO,
-+              MPP29_TSMP9,
-+              MPP30_GPIO,
-+              MPP31_GPIO,
-+              MPP32_GPIO,
-+              MPP33_GPIO,
-+              MPP34_GPIO,
-+              MPP35_GPIO,
-+              MPP36_GPIO,
-+              MPP37_GPIO,
-+              MPP38_GPIO,
-+              MPP39_GPIO,
-+              MPP40_GPIO,
-+              MPP41_GPIO,
-+              MPP42_GPIO,
-+              MPP43_GPIO,
-+              MPP44_GPIO,
-+              MPP45_GPIO,
-+              MPP46_GPIO,
-+              MPP47_GPIO,
-+              MPP48_GPIO,
-+              MPP49_GPIO,
-+              0
-+      };
-+      kirkwood_mpp_conf(kwmpp_config);
-+
-+      /* adress of boot parameters */
-+      gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
-+
-+return 0;
-+}
-+
-+int misc_init_r()
-+{
-+  int __machine_arch_type;
-+  char *str_arc_number = getenv("arcNumber");
-+
-+  if (str_arc_number) {
-+    __machine_arch_type = simple_strtoul(str_arc_number, NULL, 10);
-+    if (!__machine_arch_type)
-+      __machine_arch_type = MACH_TYPE_DOCKSTAR;
-+  }
-+
-+      /*
-+       * arch number of board
-+       */
-+      gd->bd->bi_arch_number = __machine_arch_type;
-+}
-+
-+int dram_init(void)
-+{
-+      int i;
-+
-+      for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-+              gd->bd->bi_dram[i].start = kw_sdram_bar(i);
-+              gd->bd->bi_dram[i].size = kw_sdram_bs(i);
-+      }
-+      return 0;
-+}
-+
-+#ifdef CONFIG_RESET_PHY_R
-+/* Configure and enable MV88E1116 PHY */
-+void reset_phy(void)
-+{
-+      u16 reg;
-+      u16 devadr;
-+      char *name = "egiga0";
-+
-+      if (miiphy_set_current_dev(name))
-+              return;
-+
-+      /* command to read PHY dev address */
-+      if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
-+              printf("Err..%s could not read PHY dev address\n",
-+                      __FUNCTION__);
-+              return;
-+      }
-+
-+      /*
-+       * Enable RGMII delay on Tx and Rx for CPU port
-+       * Ref: sec 4.7.2 of chip datasheet
-+       */
-+      miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
-+      miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
-+      reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-+      miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
-+      miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
-+
-+      /* reset the phy */
-+      miiphy_reset(name, devadr);
-+
-+      printf("88E1116 Initialized on %s\n", name);
-+}
-+#endif /* CONFIG_RESET_PHY_R */
-+
-+
-+static uint8_t saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
-+static uint8_t saved_blink_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
-+static uint32_t gpio_pin[2] = {1 << (14 + STATUS_LED_GREEN),
-+                             1 << (14 + STATUS_LED_RED)};
-+
-+inline void switch_LED_on(uint8_t led)
-+{
-+  struct kwgpio_registers *gpio = (struct kwgpio_registers *)KW_GPIO1_BASE;
-+
-+      writel(readl(&gpio->oe) & ~gpio_pin[led], &gpio->oe);
-+      saved_state[led] = STATUS_LED_ON;
-+}
-+
-+inline void switch_LED_off(uint8_t led)
-+{
-+  struct kwgpio_registers *gpio = (struct kwgpio_registers *)KW_GPIO1_BASE;
-+
-+      writel(readl(&gpio->oe) | gpio_pin[led], &gpio->oe);
-+      saved_state[led] = STATUS_LED_OFF;
-+}
-+
-+void red_LED_on(void)
-+{
-+      switch_LED_on(STATUS_LED_RED);
-+}
-+
-+void red_LED_off(void)
-+{
-+      switch_LED_off(STATUS_LED_RED);
-+}
-+
-+void green_LED_on(void)
-+{
-+      switch_LED_on(STATUS_LED_GREEN);
-+}
-+
-+void green_LED_off(void)
-+{
-+      switch_LED_off(STATUS_LED_GREEN);
-+}
-+
-+void __led_init(led_id_t mask, int state)
-+{
-+      __led_set(mask, state);
-+}
-+
-+void __led_toggle(led_id_t mask)
-+{
-+      if (STATUS_LED_RED == mask) {
-+              (saved_state[STATUS_LED_RED] == STATUS_LED_ON) ? red_LED_off() 
: red_LED_on();
-+      } else if (STATUS_LED_GREEN == mask) {
-+              (saved_state[STATUS_LED_GREEN] == STATUS_LED_ON) ? 
green_LED_off() : green_LED_on();
-+      }
-+}
-+
-+void __led_set(led_id_t mask, int state)
-+{
-+      if (STATUS_LED_RED == mask) {
-+              (STATUS_LED_ON == state) ? red_LED_on() : red_LED_off();
-+      } else if (STATUS_LED_GREEN == mask) {
-+              (STATUS_LED_ON == state) ? green_LED_on() : green_LED_off();
-+      }
-+}
-+
-+inline void switch_LED_blink_on(uint8_t led)
-+{
-+  struct kwgpio_registers *gpio = (struct kwgpio_registers *)KW_GPIO1_BASE;
-+
-+      writel(readl(&gpio->blink_en) | gpio_pin[led], &gpio->blink_en);
-+      saved_state[led] = STATUS_LED_ON;
-+}
-+
-+inline void switch_LED_blink_off(uint8_t led)
-+{
-+  struct kwgpio_registers *gpio = (struct kwgpio_registers *)KW_GPIO1_BASE;
-+
-+      writel(readl(&gpio->blink_en) & ~gpio_pin[led], &gpio->blink_en);
-+      saved_state[led] = STATUS_LED_OFF;
-+}
-+
-+void red_LED_blink_on(void)
-+{
-+      switch_LED_blink_on(STATUS_LED_RED);
-+}
-+
-+void red_LED_blink_off(void)
-+{
-+      switch_LED_blink_off(STATUS_LED_RED);
-+}
-+
-+void green_LED_blink_on(void)
-+{
-+      switch_LED_blink_on(STATUS_LED_GREEN);
-+}
-+
-+void green_LED_blink_off(void)
-+{
-+      switch_LED_blink_off(STATUS_LED_GREEN);
-+}
-+
-+void set_LED(char *szStatus)
-+{
-+  uint8_t led    = -1;
-+  uint8_t status = -1;
-+
-+  /* Convert string to lowercase, max len 32 */
-+  int max = 32;
-+  char *s = szStatus;
-+  while (*s && max--)
-+    *s++ = tolower(*s);
-+  s = szStatus;
-+
-+  /* Start with everything off */
-+  switch_LED_off(STATUS_LED_GREEN);
-+  switch_LED_blink_off(STATUS_LED_GREEN);
-+  switch_LED_off(STATUS_LED_RED);
-+  switch_LED_blink_off(STATUS_LED_RED);
-+
-+  if (szStatus == NULL)
-+  {
-+    red_LED_on();
-+    red_LED_blink_on();
-+    return;
-+  }
-+
-+  if ( strncmp(s, "green", 5) == 0 )
-+  {
-+    s += 5;
-+    led = STATUS_LED_GREEN;
-+  }
-+  else if ( strncmp(s, "orange", 6) == 0 )
-+  {
-+    s += 6;
-+    led = STATUS_LED_RED;
-+  }
-+  else if ( strncmp(s, "red", 3) == 0 )
-+  {
-+    s += 3;
-+    led = STATUS_LED_RED;
-+  }
-+
-+  if (led == -1 ) return;
-+
-+  /* Skip Whitespace */
-+  while ( isspace(*s) ) s++;
-+
-+  /* Commands like "green" or "orange" should just turn the light on */
-+  if ( *s == NULL || ( strncmp(s, "on", 2) == 0 ) )
-+    status = STATUS_LED_ON;
-+  else if ( strncmp(s, "blink", 5) == 0 )
-+    status = STATUS_LED_BLINKING;
-+  /* Unknown commands should turn the light off */
-+  else
-+    status = STATUS_LED_OFF;
-+
-+  if (status == STATUS_LED_OFF)
-+  {
-+    switch_LED_off(led);
-+    switch_LED_blink_off(led);
-+  }
-+  else
-+  {
-+    switch_LED_on(led);
-+    if (status == STATUS_LED_BLINKING)
-+      switch_LED_blink_on(led);
-+  }
-+}
-+
-+
-+void show_boot_progress (int val)
-+{
-+  if (val < 0)
-+    set_LED( getenv("led_error") );
-+
-+  /* Ethernet Init */
-+  else if (val == 64)
-+    set_LED( getenv("led_init") );
-+
-+  /* Passing control to an image */
-+  else if (val == 15)
-+    set_LED( getenv("led_exit") );
-+}
-+
-diff -Naur u-boot-2010.09.orig/board/Marvell/dockstar/dockstar.h 
u-boot-2010.09.new/board/Marvell/dockstar/dockstar.h
---- u-boot-2010.09.orig/board/Marvell/dockstar/dockstar.h      1969-12-31 
19:00:00.000000000 -0500
-+++ u-boot-2010.09.new/board/Marvell/dockstar/dockstar.h       2010-10-22 
11:27:19.000000000 -0400
-@@ -0,0 +1,44 @@
-+/*
-+ * (C) Copyright 2009
-+ * Marvell Semiconductor <www.marvell.com>
-+ * Written-by: Prafulla Wadaskar <[email protected]>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-+ * MA 02110-1301 USA
-+ */
-+
-+#ifndef __DOCKSTAR_H
-+#define __DOCKSTAR_H
-+
-+#define DOCKSTAR_OE_LOW       (~(0))
-+#define DOCKSTAR_OE_VAL_LOW   (1 << 29)       /* USB_PWEN low */
-+#define DOCKSTAR_OE_HIGH      (~(0))
-+#define DOCKSTAR_OE_VAL_HIGH  (0)
-+
-+//#define DOCKSTAR_OE_HIGH (~(0x1 << 15)) /* Orange */
-+//#define DOCKSTAR_OE_HIGH (~(0x1 << 14)) /* Green */
-+
-+/* PHY related */
-+#define MV88E1116_LED_FCTRL_REG               10
-+#define MV88E1116_CPRSP_CR3_REG               21
-+#define MV88E1116_MAC_CTRL_REG                21
-+#define MV88E1116_PGADR_REG           22
-+#define MV88E1116_RGMII_TXTM_CTRL     (1 << 4)
-+#define MV88E1116_RGMII_RXTM_CTRL     (1 << 5)
-+
-+#endif /* __DOCKSTAR_H */
-diff -Naur u-boot-2010.09.orig/board/Marvell/dockstar/kwbimage.cfg 
u-boot-2010.09.new/board/Marvell/dockstar/kwbimage.cfg
---- u-boot-2010.09.orig/board/Marvell/dockstar/kwbimage.cfg    1969-12-31 
19:00:00.000000000 -0500
-+++ u-boot-2010.09.new/board/Marvell/dockstar/kwbimage.cfg     2010-10-22 
11:27:19.000000000 -0400
-@@ -0,0 +1,162 @@
-+#
-+# (C) Copyright 2009
-+# Marvell Semiconductor <www.marvell.com>
-+# Written-by: Prafulla Wadaskar <[email protected]>
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-+# MA 02110-1301 USA
-+#
-+# Refer docs/README.kwimage for more details about how-to configure
-+# and create kirkwood boot image
-+#
-+
-+# Boot Media configurations
-+BOOT_FROM     nand
-+NAND_ECC_MODE default
-+NAND_PAGE_SIZE        0x0800
-+
-+# SOC registers configuration using bootrom header extension
-+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
-+
-+# Configure RGMII-0 interface pad voltage to 1.8V
-+DATA 0xFFD100e0 0x1b1b1b9b
-+
-+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
-+DATA 0xFFD01400 0x43000c30    # DDR Configuration register
-+# bit13-0:  0xc30 (3120 DDR2 clks refresh rate)
-+# bit23-14: zero
-+# bit24: 1= enable exit self refresh mode on DDR access
-+# bit25: 1 required
-+# bit29-26: zero
-+# bit31-30: 01
-+
-+DATA 0xFFD01404 0x37543000    # DDR Controller Control Low
-+# bit 4:    0=addr/cmd in smame cycle
-+# bit 5:    0=clk is driven during self refresh, we don't care for APX
-+# bit 6:    0=use recommended falling edge of clk for addr/cmd
-+# bit14:    0=input buffer always powered up
-+# bit18:    1=cpu lock transaction enabled
-+# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
-+# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered 
DIMM
-+# bit30-28: 3 required
-+# bit31:    0=no additional STARTBURST delay
-+
-+DATA 0xFFD01408 0x22125451    # DDR Timing (Low) (active cycles value +1)
-+# bit3-0:   TRAS lsbs
-+# bit7-4:   TRCD
-+# bit11- 8: TRP
-+# bit15-12: TWR
-+# bit19-16: TWTR
-+# bit20:    TRAS msb
-+# bit23-21: 0x0
-+# bit27-24: TRRD
-+# bit31-28: TRTP
-+
-+DATA 0xFFD0140C 0x00000a33    #  DDR Timing (High)
-+# bit6-0:   TRFC
-+# bit8-7:   TR2R
-+# bit10-9:  TR2W
-+# bit12-11: TW2W
-+# bit31-13: zero required
-+
-+DATA 0xFFD01410 0x0000000d    #  DDR Address Control
-+# bit1-0:   00, Cs0width=x8
-+# bit3-2:   11, Cs0size=1Gb
-+# bit5-4:   00, Cs1width=nonexistent
-+# bit7-6:   00, Cs1size =nonexistent
-+# bit9-8:   00, Cs2width=nonexistent
-+# bit11-10: 00, Cs2size =nonexistent
-+# bit13-12: 00, Cs3width=nonexistent
-+# bit15-14: 00, Cs3size =nonexistent
-+# bit16:    0,  Cs0AddrSel
-+# bit17:    0,  Cs1AddrSel
-+# bit18:    0,  Cs2AddrSel
-+# bit19:    0,  Cs3AddrSel
-+# bit31-20: 0 required
-+
-+DATA 0xFFD01414 0x00000000    #  DDR Open Pages Control
-+# bit0:    0,  OpenPage enabled
-+# bit31-1: 0 required
-+
-+DATA 0xFFD01418 0x00000000    #  DDR Operation
-+# bit3-0:   0x0, DDR cmd
-+# bit31-4:  0 required
-+
-+DATA 0xFFD0141C 0x00000C52    #  DDR Mode
-+# bit2-0:   2, BurstLen=2 required
-+# bit3:     0, BurstType=0 required
-+# bit6-4:   4, CL=5
-+# bit7:     0, TestMode=0 normal
-+# bit8:     0, DLL reset=0 normal
-+# bit11-9:  6, auto-precharge write recovery ????????????
-+# bit12:    0, PD must be zero
-+# bit31-13: 0 required
-+
-+DATA 0xFFD01420 0x00000040    #  DDR Extended Mode
-+# bit0:    0,  DDR DLL enabled
-+# bit1:    0,  DDR drive strenght normal
-+# bit2:    0,  DDR ODT control lsd (disabled)
-+# bit5-3:  000, required
-+# bit6:    1,  DDR ODT control msb, (disabled)
-+# bit9-7:  000, required
-+# bit10:   0,  differential DQS enabled
-+# bit11:   0, required
-+# bit12:   0, DDR output buffer enabled
-+# bit31-13: 0 required
-+
-+DATA 0xFFD01424 0x0000F17F    #  DDR Controller Control High
-+# bit2-0:  111, required
-+# bit3  :  1  , MBUS Burst Chop disabled
-+# bit6-4:  111, required
-+# bit7  :  0
-+# bit8  :  1  , add writepath sample stage, must be 1 for DDR freq >= 300MHz
-+# bit9  :  0  , no half clock cycle addition to dataout
-+# bit10 :  0  , 1/4 clock cycle skew enabled for addr/ctl signals
-+# bit11 :  0  , 1/4 clock cycle skew disabled for write mesh
-+# bit15-12: 1111 required
-+# bit31-16: 0    required
-+
-+DATA 0xFFD01428 0x00085520    # DDR2 ODT Read Timing (default values)
-+DATA 0xFFD0147C 0x00008552    # DDR2 ODT Write Timing (default values)
-+
-+DATA 0xFFD01504 0x07FFFFF1    # CS[0]n Size
-+#DATA 0xFFD01500 0x00000000   # CS[0]n Base address to 0x0
-+#DATA 0xFFD01504 0x0FFFFFF1   # CS[0]n Size
-+# bit0:    1,  Window enabled
-+# bit1:    0,  Write Protect disabled
-+# bit3-2:  00, CS0 hit selected
-+# bit23-4: ones, required
-+# bit31-24: 0x0F, Size (i.e. 256MB)
-+
-+DATA 0xFFD01508 0x10000000    # CS[1]n Size, window disabled
-+DATA 0xFFD0150C 0x00000000    # CS[2]n Size, window disabled
-+DATA 0xFFD01514 0x00000000    # CS[3]n Size, window disabled
-+
-+DATA 0xFFD0151C 0x00000000    #  DDR ODT Control (Low)
-+DATA 0xFFD01494 0x00030000    #  DDR ODT Control (High)
-+# bit1-0:  00, ODT0 controlled by ODT Control (low) register above
-+# bit3-2:  01, ODT1 active NEVER!
-+# bit31-4: zero, required
-+
-+DATA 0xFFD01498 0x00000000    # CPU ODT Control
-+DATA 0xFFD0149C 0x0000e803    # DDR Initialization Control
-+DATA 0xFFD01480 0x00000001    # DDR Initialization Control
-+#bit0=1, enable DDR init upon this register write
-+
-+# End of Header extension
-+DATA 0x0 0x0
-diff -Naur u-boot-2010.09.orig/board/Marvell/dockstar/Makefile 
u-boot-2010.09.new/board/Marvell/dockstar/Makefile
---- u-boot-2010.09.orig/board/Marvell/dockstar/Makefile        1969-12-31 
19:00:00.000000000 -0500
-+++ u-boot-2010.09.new/board/Marvell/dockstar/Makefile 2010-10-22 
11:27:19.000000000 -0400
-@@ -0,0 +1,51 @@
-+#
-+# (C) Copyright 2009
-+# Marvell Semiconductor <www.marvell.com>
-+# Written-by: Prafulla Wadaskar <[email protected]>
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-+# MA 02110-1301 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB   = $(obj)lib$(BOARD).a
-+
-+COBJS := dockstar.o
-+
-+SRCS  := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-+OBJS  := $(addprefix $(obj),$(COBJS))
-+SOBJS := $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB):       $(obj).depend $(OBJS) $(SOBJS)
-+      $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+      rm -f $(SOBJS) $(OBJS)
-+
-+distclean:    clean
-+      rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-diff -Naur u-boot-2010.09.orig/include/configs/dockstar.h 
u-boot-2010.09.new/include/configs/dockstar.h
---- u-boot-2010.09.orig/include/configs/dockstar.h     1969-12-31 
19:00:00.000000000 -0500
-+++ u-boot-2010.09.new/include/configs/dockstar.h      2010-10-22 
11:27:42.000000000 -0400
-@@ -0,0 +1,259 @@
-+/*
-+ * (C) Copyright 2009
-+ * Marvell Semiconductor <www.marvell.com>
-+ * Written-by: Prafulla Wadaskar <[email protected]>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-+ * MA 02110-1301 USA
-+ */
-+
-+#ifndef _CONFIG_DOCKSTAR_H
-+#define _CONFIG_DOCKSTAR_H
-+
-+/*
-+ * Version number information
-+ */
-+#define CONFIG_IDENT_STRING   "\nMarvell-Dockstar/Pogoplug by Jeff Doozan"
-+
-+/*
-+ * High Level Configuration Options (easy to change)
-+ */
-+#define CONFIG_MARVELL                1
-+#define CONFIG_ARM926EJS      1       /* Basic Architecture */
-+#define CONFIG_FEROCEON_88FR131       1       /* CPU Core subversion */
-+#define CONFIG_KIRKWOOD               1       /* SOC Family Name */
-+#define CONFIG_KW88F6281      1       /* SOC Name */
-+#define CONFIG_MACH_DOCKSTAR  /* Machine type */
-+
-+#define CONFIG_MD5    /* get_random_hex on krikwood needs MD5 support */
-+#define CONFIG_SKIP_LOWLEVEL_INIT     /* disable board lowlevel_init */
-+#define CONFIG_KIRKWOOD_EGIGA_INIT    /* Enable GbePort0/1 for kernel */
-+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
-+
-+/*
-+ * CLKs configurations
-+ */
-+#define CONFIG_SYS_HZ         1000
-+
-+/*
-+ * NS16550 Configuration
-+ */
-+#define CONFIG_SYS_NS16550
-+#define CONFIG_SYS_NS16550_SERIAL
-+#define CONFIG_SYS_NS16550_REG_SIZE   (-4)
-+#define CONFIG_SYS_NS16550_CLK                CONFIG_SYS_TCLK
-+#define CONFIG_SYS_NS16550_COM1               KW_UART0_BASE
-+
-+/*
-+ * Serial Port configuration
-+ * The following definitions let you select what serial you want to use
-+ * for your console driver.
-+ */
-+
-+#define CONFIG_CONS_INDEX     1       /*Console on UART0 */
-+#define CONFIG_BAUDRATE                       115200
-+#define CONFIG_SYS_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, \
-+                                        115200,230400, 460800, 921600 }
-+/* auto boot */
-+#define CONFIG_BOOTDELAY      3       /* default enable autoboot */
-+
-+/*
-+ * For booting Linux, the board info and command line data
-+ * have to be in the first 8 MB of memory, since this is
-+ * the maximum mapped by the Linux kernel during initialization.
-+ */
-+#define CONFIG_CMDLINE_TAG    1       /* enable passing of ATAGs  */
-+#define CONFIG_INITRD_TAG     1       /* enable INITRD tag */
-+#define CONFIG_SETUP_MEMORY_TAGS 1    /* enable memory tag */
-+
-+#define       CONFIG_SYS_PROMPT       "Marvell>> "    /* Command Prompt */
-+#define       CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
-+#define       CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
-+              +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
-+
-+/*
-+ * Commands configuration
-+ */
-+#define CONFIG_SYS_NO_FLASH           /* Declare no flash (NOR/SPI) */
-+#include <config_cmd_default.h>
-+#define CONFIG_CMD_AUTOSCRIPT
-+#define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_ENV
-+#define CONFIG_CMD_MII
-+#define CONFIG_CMD_NAND
-+#define CONFIG_CMD_PING
-+#define CONFIG_CMD_USB
-+#define CONFIG_SYS_LONGHELP
-+#define CONFIG_PREBOOT
-+#define CONFIG_SYS_HUSH_PARSER
-+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-+/*
-+ * NAND configuration
-+ */
-+#ifdef CONFIG_CMD_NAND
-+#define CONFIG_NAND_KIRKWOOD
-+#define CONFIG_SYS_MAX_NAND_DEVICE    1
-+#define NAND_MAX_CHIPS                        1
-+#define CONFIG_SYS_NAND_BASE          0xD8000000      /* KW_DEFADR_NANDF */
-+#define NAND_ALLOW_ERASE_ALL          1
-+#endif
-+
-+/*
-+ *  Environment variables configurations
-+ */
-+#ifdef CONFIG_CMD_NAND
-+#define CONFIG_ENV_IS_IN_NAND         1
-+#define CONFIG_ENV_SECT_SIZE          0x20000 /* 128K */
-+#else
-+#define CONFIG_ENV_IS_NOWHERE         1       /* if env in SDRAM */
-+#endif
-+/*
-+ * max 4k env size is enough, but in case of nand
-+ * it has to be rounded to sector size
-+ */
-+#define CONFIG_ENV_SIZE                       0x20000 /* 128k */
-+#define CONFIG_ENV_ADDR                       0xc0000
-+#define CONFIG_ENV_OFFSET             0xc0000 /* env starts here */
-+
-+/*
-+ * Default environment variables
-+ */
-+
-+#define CONFIG_EXTRA_ENV_SETTINGS \
-+  "arcNumber=2097\0" \
-+  "mainlineLinux=yes\0" \
-+  "console=ttyS0,115200\0" \
-+  "usb_init=usb start\0" \
-+  "usb_device=0:1\0" \
-+  "usb_root=/dev/sda1\0" \
-+  "usb_rootfstype=ext2\0" \
-+  "usb_rootdelay=10\0"\
-+  \
-+  "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)\0"\
-+  "mtdids=nand0=orion_nand\0"\
-+  "partition=nand0,2\0"\
-+  \
-+  "bootcmd_pogo=fsload uboot-original-mtd0.kwb; go 0x800200\0" \
-+  \
-+  /* Zero the first bit at 0x800000 to clear any old image still in RAM after 
a warm reboot */\
-+  "usb_load_uimage=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 
/boot/uImage\0"\
-+  "usb_boot="\
-+    "if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then"\
-+    " bootm 0x800000 0x1100000;"\
-+    "else"\
-+    " bootm 0x800000;"\
-+    "fi;\0"\
-+  \
-+  "set_bootargs_usb=setenv bootargs console=$console root=$usb_root 
rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts\0" \
-+  "bootcmd_usb=run usb_init; run usb_load_uimage; run set_bootargs_usb; run 
usb_boot;\0" \
-+  \
-+  "led_init=green blinking\0" \
-+  "led_exit=green off\0" \
-+  "led_error=orange blinking\0"
-+
-+
-+#define CONFIG_BOOTCOMMAND "run bootcmd_usb; usb stop; run bootcmd_pogo; 
reset"
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1 MiB for malloc() */
-+/* size in bytes reserved for initial data */
-+#define CONFIG_SYS_GBL_DATA_SIZE      128
-+
-+/*
-+ * Other required minimal configurations
-+ */
-+#define CONFIG_SYS_LONGHELP
-+#define CONFIG_AUTO_COMPLETE
-+#define CONFIG_CMDLINE_EDITING
-+#define CONFIG_ARCH_CPU_INIT  /* call arch_cpu_init() */
-+#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
-+#define CONFIG_DISPLAY_CPUINFO        /* Display cpu info */
-+#define CONFIG_NR_DRAM_BANKS  4
-+#define CONFIG_STACKSIZE      0x00100000      /* regular stack- 1M */
-+#define CONFIG_SYS_LOAD_ADDR  0x00800000      /* default load adr- 8M */
-+#define CONFIG_SYS_MEMTEST_START 0x00400000   /* 4M */
-+#define CONFIG_SYS_MEMTEST_END        0x007fffff      /*(_8M -1) */
-+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000   /* Rst Vector Adr */
-+#define CONFIG_SYS_MAXARGS    16      /* max number of command args */
-+
-+/*
-+ * Ethernet Driver configuration
-+ */
-+#ifdef CONFIG_CMD_NET
-+#define CONFIG_NETCONSOLE     /* include NetConsole support   */
-+#define CONFIG_NET_MULTI      /* specify more that one ports available */
-+#define       CONFIG_MII              /* expose smi ove miiphy interface */
-+#define CONFIG_MVGBE          /* Enable Marvell Gbe Controller Driver */
-+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN       /* detect link using phy */
-+#define CONFIG_MVGBE_PORTS    {1, 0}  /* enable port 0 only */
-+#define CONFIG_PHY_BASE_ADR   0
-+#define CONFIG_ENV_OVERWRITE  /* ethaddr can be reprogrammed */
-+#define CONFIG_RESET_PHY_R    /* use reset_phy() to init mv8831116 PHY */
-+#endif /* CONFIG_CMD_NET */
-+
-+/*
-+ * USB/EHCI
-+ */
-+#ifdef CONFIG_CMD_USB
-+#define CONFIG_USB_EHCI                       /* Enable EHCI USB support */
-+#define CONFIG_USB_EHCI_KIRKWOOD      /* on Kirkwood platform */
-+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-+#define CONFIG_EHCI_IS_TDI
-+#define CONFIG_USB_STORAGE
-+#define CONFIG_DOS_PARTITION
-+#define CONFIG_ISO_PARTITION
-+#define CONFIG_SUPPORT_VFAT
-+#endif /* CONFIG_CMD_USB */
-+
-+/*
-+ * File system
-+ */
-+#define CONFIG_CMD_EXT2
-+#define CONFIG_CMD_FAT
-+#define CONFIG_CMD_JFFS2
-+#define CONFIG_JFFS2_NAND
-+#define CONFIG_JFFS2_LZO
-+#define CONFIG_CMD_UBI
-+#define CONFIG_CMD_UBIFS
-+#define CONFIG_RBTREE
-+#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-+#define CONFIG_MTD_PARTITIONS
-+#define CONFIG_CMD_MTDPARTS
-+#define CONFIG_LZO
-+
-+#define CONFIG_STATUS_LED
-+#define CONFIG_BOARD_SPECIFIC_LED
-+
-+#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN // Fix
-+
-+#define STATUS_LED_GREEN   0
-+#define STATUS_LED_RED     1
-+
-+#define STATUS_LED_BIT     STATUS_LED_GREEN
-+#define STATUS_LED_STATE   STATUS_LED_OFF
-+#define STATUS_LED_PERIOD  (CONFIG_SYS_HZ /4)
-+
-+#define STATUS_LED_BIT1    STATUS_LED_RED
-+#define STATUS_LED_STATE1  STATUS_LED_OFF
-+#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ /4)
-+
-+#define CONFIG_MISC_INIT_R
-+
-+#endif /* _CONFIG_DOCKSTAR_H */
_______________________________________________
Frugalware-git mailing list
[email protected]
http://frugalware.org/mailman/listinfo/frugalware-git

Reply via email to