PessoALL, Instalei uma placa Orinoco da Lucent e tudo funcionou legal, mas � comum acontecer o seguinte erro ao inicializar a m�quina: "wi_cmd: busy bit won't clear"
Acontencendo isso eu volto a desligar a m�quina e volta ao normal. Algu�m tem id�ia do que pode estar ocorrendo ??? Abaixo os logs do messages: /kernel: wi0 at port 0x240-0x27f irq 3 slot 0 on pccard0 /kernel: wi0: 802.11 address: 00:02:2d:1e:8e:b6 kernel: wi0: using Lucent Technologies, WaveLAN/IEEE /kernel: wi0: Lucent Firmware: Station 7.28.01 /kernel: wi0: timeout in wi_cmd 0x0002; event status 0x8080 /kernel: wi0: timeout in wi_cmd 0x0000; event status 0x8080 /kernel: wi0: wi_cmd: busy bit won't clear. /kernel: wi0: wi_cmd: busy bit won't clear. /kernel: wi0: init failed /kernel: wi0: wi_cmd: busy bit won't clear. last message repeated 21 times /kernel: wi0: failed to allocate 1594 bytes on NIC /kernel: wi0: tx buffer allocation failed /kernel: wi0: wi_cmd: busy bit won't clear. /kernel: wi0: failed to allocate 1594 bytes on NIC /kernel: wi0: mgmt. buffer allocation failed /kernel: wi0: timeout in wi_seek to 0/0; last status 4000 /kernel: wi0: timeout in wi_seek to 0/44; last status 4044 /kernel: wi0: wi_cmd: busy bit won't clear. /kernel: wi0: xmit failed Obrigado. -- Eduardo Augusto Cosa _______________________________________________________________ Sair da Lista: http://www2.fugspbr.org/mailman/listinfo/fugspbr Historico: http://www4.fugspbr.org/lista/html/FUG-BR/
