Dear Listmembers, I am upgrading my FW system from FP2 to AI R54. Currently the older FP2 and the AI R54 are also running. I have many SecureRemote (>3000) clients with various OS, ISP, and line types, and NAT.
Somewhere where the SR SP2 had been changed to R54 the SR R54 is working fine with the older FP2 FW but isn't whit the new one. The authentication, and keyxch to by the new FW is correct but the VPN tunnel doesn't work with the new FW which is running with AI R54. I use Support IKE over TCP, but do not the Force UDP encap. If I upgrade my SR from R54 to R55 I can communicate trought the new FW but more slower than the older one. I suspect to PMTU problem, but I have not enough experience to use MTUAdjust by hand. Any tips tricks or working around is welcome. Best regards, _____________________________________________________________________ Dorn Andras [EMAIL PROTECTED], [EMAIL PROTECTED] Andrew Dorn Budapesti Muszaki Egyetem Technical University of Budapest Karman Todor Kollegium Karman Todor Student Hostel --------------------------------------------------------------------- ================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
