new IP530, 512MB memory, average throughput is 10%
been running in production for 3months
not sure how to answer this one though
Can you provide bandwidth info on the state sync interface?
<[EMAIL PROTECTED]
.com>
To
04/27/2004 10:46 <[EMAIL PROTECTED]>,
AM <[EMAIL PROTECTED]
OINT.COM>
cc
Subject
RE: state sync not working / high
CPU/ error: "bind failed: Address
already in use"
Dan,
What Nokia platforms are being used?
How much memory in each?
What is the traffic load?
Can you provide bandwidth info on the state sync interface?
NOKIA
Nick Moore
Nokia Enterprise Solutions
200 S. Wacker Drive, 35th Floor
Chicago, Illinois 60606
Mobile: 847-414-2687
Fax: 312-876-2632
Mail: [EMAIL PROTECTED]
Web: http://www.nokia.com/mobilebusiness/americas
-----Original Message-----
From: ext Daniel Samaan [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 27, 2004 10:23 AM
To: [EMAIL PROTECTED]
Subject: state sync not working / high CPU/ error: "bind failed: Address
already in use"
Importance: High
Running AI R54 with Build 31 with VRRP.
The Nokia's are peaking at 90% plus at random times on both the primary
and standby. I can correlate this with the ClusterXL going up/down via
SmartView Status. Thinking that state synch is causing the issue, I
rebooted the standby and now the standby is peaking at 96% with the
cphamcset process running at 96%.
running cphaprob state on the secondary, shows the primary as
nonexistent.
However the cpahprob state on the primary shows the secondary as Active?
If I try and stop/start the cpha module on the secondary I get this
error from the CLI. "bind failed: Address already in use"
good thing is that traffic is not affected...maybe slow from time to
time.....Also, VRRP is always maintained, a failover never occurs..thus
VRRP is working ok to my knowledge.
thoughts....
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[EMAIL PROTECTED]
=================================================
