Hi all,

It's an  AI R55,IPSO 3.7 B32  environment, consecutive UDP packets sent to FW and will 
be Nated by FW ,then go through the FW.
We found sometimes UDP packets lost due to unknown reason, I am seeking any help here.

1 Inbound interface log  by TCPDUMP

No. Time        Source                Destination           FW-1 if      Protocol Info
      1 0.000000    10.162.65.156         210.21.197.10            ^         UDP      
Source port: 1104  Destination port: 3456
      2 1.500755    10.162.65.156         210.21.197.10            ^         UDP      
Source port: 1104  Destination port: 3456          <<<<<this packet was lost

2   strange  thing found in fw_monitor,above 2nd UDP packet was wrongly Nated in the 
inbound interface Eth-s1p3c0, thus was dropped later.

No. Time        Source                Destination           FW-1 if      Protocol Info
      1 0.000000    10.162.65.156         210.21.197.10          i eth-s1p3c0          
eth-s1p2c0     UDP      Source port: 1104  Destination port: 3456
      2 0.000296    10.162.65.156         210.21.197.10            eth-s1p3c0 I        
eth-s1p2c0     UDP      Source port: 1104  Destination port: 3456
      3 0.000334    10.162.65.156         210.21.197.10            eth-s1p3c0          
eth-s1p2c0 o  UDP      Source port: 1104  Destination port: 3456
      4 0.000504    211.138.28.129        210.21.197.10            eth-s1p3c0     O 
eth-s1p2c0      UDP      Source port: 25608  Destination port: 3456

      5 1.500760    211.138.28.129        210.21.197.10          i eth-s1p3c0      
eth-s1p2c0   UDP      Source port: 25608  Destination port: 3456     <<<<   Why was 
NATed!!!
      6 1.500935    211.138.28.129        210.21.197.10            eth-s1p3c0 I    
eth-s1p2c0   UDP      Source port: 25608  Destination port: 3456
      7 1.500960    211.138.28.129        210.21.197.10            eth-s1p3c0      
eth-s1p2c0 o UDP      Source port: 25608  Destination port: 3456      <<<< Dropped

The only difference for the 2 UDP packets was ip_identification=0x0b16 and 0x0b17.

Any experience for this issue? or any suggestion for further troubleshooting?
Your input will be great appreciated!!


Br,
LIn Murong

=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[EMAIL PROTECTED]
=================================================

Reply via email to