Hi, Not too sure about Rainwall but you may want to look at Dynamic Interface resolution feature, it works well for ClusterXL and ISP redundancy for both Site to Site and SecureRemote connections. For SR/SC You have to enable it under
Global Properties->Remote Access->Advanced.. You must then enable it per gateway Gateway->VPN->Advanced->Dynamic Interface Resolving Config..Select Enable Dynamic Resolution by Securemote/SecureClient. I have only used this setup with ClusterXL and ISP redundancy, so I'm not sure how well it may work with Rainwall. HTH, Ross. Ross Bushby - Senior Security Architect CISSP Real Solutions Ltd, Unit B&C, Oakcroft Business Centre, Oakcroft Road,Chessington,Surrey,UK. KT9 1RH. Tel +44 (0)208 391 4080, Fax: +44 (0)208 391 4081 N O T I C E This message and any attachments are intended only for the individual or company to which it is addressed and may contain information which is privileged, confidential or prohibited from disclosure or unauthorised use Any form of dissemination, copying, disclosure, distribution and/or publication of this e-mail message or its attachments to third parties is only permitted with the express permission of the sender. We cannot accept any liability for any loss or damage sustained as a result of software viruses. It is your responsibility to carry out such virus checking as is necessary before opening any attachment. ================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
