Yeah, unfortunately mii-tool doesn't work for the e1000 network cards, and ethtool didn't do anything (on R55W). I don't think it will work in R55 either....
On 1/13/06, Lyle Dove <[EMAIL PROTECTED]> wrote: > I've always done this in the file /etc/rc.local, and never experienced this > problem. > > # Hardcode Interfaces > mii-tool -F 100baseTx-FD eth0 > mii-tool -F 100baseTx-FD eth1 > mii-tool -F 100baseTx-FD eth2 > > Depending on the interface, you may need to use ethtool instead of mii-tool. > Some experimentation would be needed. Hope this helps. > > -Lyle > > > > -----Original Message----- > From: Mailing list for discussion of Firewall-1 > [mailto:[EMAIL PROTECTED] On Behalf Of Edward Luck > Sent: Thursday, January 12, 2006 12:21 AM > To: [email protected] > Subject: [FW-1] SecurePlatform interfaces disappearing after applying Full > duplex & speed options in modules.conf > > Hi folks, > > I have previously built SPLAT boxes running R55W and forced the interface > duplex to 100mb/s, as with this example on a DL380G4: > > options e1000.4.6.11 Duplex=2,2,2,2 Speed=100,100,100,100 options bcm5700 > line_speed=100,100 full_duplex=1,1 auto_speed=0,0 > > However, I just tried the same thing on an identically configured DL380 > running R55 (*not* R55W), and all the interfaces disappeared > when it rebooted! I had to remove these lines from modules.conf to > get the interfaces back again. > > Has anyone seen this before? Does it even make sense? I sure don't think > so. > > Ed Luck > > -- > Keep flying, and stay shiny. > ================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
