Hi all,
thanks for your good answers. I have check my system and find the
"insmod" process, too.
The cluster nodes are stabel, so i don't want to make any changes on my
systems.
I hope CheckPoint can fix this problem in one of the next HFAs.
In my lab i have build this cluster and would try to find the "hanging"
module but i don't know when i get the time to test.
thx Joerg
p.s. The kernel version is 2.4.21-20cpsmp.
Information Technology wrote:
Hi all,
what is the load average on your CheckPoint FW system?
My customer has a CheckPoint ClusterXL with two nodes on SPLAT and a
permanent load average from 1.0 on both nodes. I think a load average
from 1.0 all over the time is courious, isn't it? Sometimes the load is
over 1.0.
The nodes are HP DL380 G4 with 2GByte memory. Two onboard Broadcom NIC
and 3 Intel Quad cards. In summary we use 7 network interfaces today.
We use CheckPoint R60 HFA03 with ClusterXL in Unicast Mode, Desktop
Policy Server and CP RealTime Monitor.
In June, we upgrade from R55 to R60 HFA03.
Currently there are 2 VPN tunnels defined and in use. In summary we have
between 400000 and 700000 connections per day.
Here is the header of top output:
17:54:22 up 1 day, 52 min, 1 user, load average: 1.00, 1.00, 1.00
50 processes: 49 sleeping, 1 running, 0 zombie, 0 stopped
CPU states: cpu user nice system irq softirq iowait idle
total 1.2% 0.0% 0.6% 0.0% 0.4% 1.0% 196.8%
cpu00 0.0% 0.0% 0.0% 0.0% 0.2% 0.4% 99.4%
cpu01 1.2% 0.0% 0.6% 0.0% 0.2% 0.6% 97.4%
Mem: 2055260k av, 338636k used, 1716624k free, 0k shrd, 74980k
buff
233944k active, 22772k inactive
Swap: 4194224k av, 0k used, 4194224k free 78260k
cached
What did you think is the right load average?
Joerg
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[EMAIL PROTECTED]
=================================================
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[EMAIL PROTECTED]
=================================================
