Hello, I have customer that currently has 3 SPLAT HA (active/standby) clusters (2 machines each).
Recently we upgraded their SmartCenter and 2 of the 3 clusters from R61 to R62 with no issues, a day later we upgraded the remaining cluster but around 3 hours later, they reported the standby module was unstable, one the interfaces repeatedly reported to to be down and then up and so on. I asked for him to check the auto negotiation or duplex settings of that interface but they found no problem, there was an IPS monitoring that segment and they disabled for a while it just in case it was doing something funny with the clustering info, but the issue remained. He also monitored the conflicting interface using mii-tool and strangely even when the SmartView Tracker showed the interface was down at a given time, mii-tool always showed link up on that interface. Finally my customer decided to test stopping the active module and let the standby module become active and it it took over the traffic with no issues at all, he thought the problem had disapear, but then a few minutes later the formerly active and now standby module started sowing the same problem, same interface number as the other box, again changing from up to down continuously. Again, this all started after upgrading from R61 to R62 and 2 other clusters have no problem at all, last the third onwe. Any ideas will be very appreciated. Regards -- Sergio Alvarez (506)8301342 ================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
