Ruiyuan Jiang wrote:
Hi, all
My client runs the latest SPLAT on HP DL380 hardware. Currently it has 3
dual port NICs on 3 PCI slots. The NICs that are being used are in PCI
slot 2 and 3 and both NIC ports are being used plus 2 built-in NICs on
the system board. The card in PCI slot 1 is not being used. My client
wants to pull the NIC in slot 1 out and put in VPN accelerator card in.
Does this change will reconfigure the firewall module and change the NIC
order such as eth0, eth1, etc.? The server is being running for a while.
Thanks in advance.
The NICs will be renumbered as there will be a NIC less.
Scanned by Check Point Total Security Gateway.
=================================================
To set vacation, Out-Of-Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[EMAIL PROTECTED]
=================================================
