Problem solved. I modified the firewall modules, but not the management
server.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 17, 2001 5:20 AM
To: Thompson, Victor E
Cc: [EMAIL PROTECTED]
Subject: Re: [FW1] Unknown established TCP packet
Do you use Nokia's?
If yes, then are you on v4.1 sp2 or sp3? If you do, then you'll need to
DISABLE
'flows' - log onto the Nokia site and search for the resloution document.
Basicall, you need to issue the command:
ipsofwd slowpath
This will disable flows until the next reboot when you'll need to do it
again.
The article also describes how to disable it completely.
Hope this helps,
Jonathan Jackson
Network Security Analyst
AMP Group
4 Broadgate, Liverpool St
London, EC2M 2PA
Tel (44) 0207 410 4688
[EMAIL PROTECTED]
___________________________________________________________________________
The information contained in this e-mail is confidential and may be legally
privileged. It is intended solely for the use of the individual or entity
to
whom it is addressed and others explicitly authorised to receive it. If you
have received this e-mail in error, please destroy it and delete it from
your
computer. Any disclosure, copying or distribution of the information is
strictly prohibited and may be unlawful. No responsibility can be accepted
to
any end users for any action taken on the basis of the information.
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
