You will need to encapsulate the SNA traffic in IP in order for FW-1 to understand how
to
forward the packets etc, and this means you will need a DLSW+ router on either end
unless
you have another way to handle SNA over TCP/IP.
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, May 09, 2001 11:24 AM
Subject: [FW1] IBM 5494 Connection
>
> Hi,
> I have a requirement to have a IBM 5494 Remote Control Unit attached to our
> firewall.
> The unit is used with a AS/400 system on a distant end.
> We are going to have a T1 point-to-point between us and our distant end.
> Our client is configuring this 5494 Control unit to us SNA end-to-end.
> The workstations will talk to this using IBM client access software pointed
> to the Mac address of the Ethernet interface on the IBM 5494.
> My question is how can I connect this unit to one of my available Ethernet
> interfaces on my Nokia IP440 Firewall without an IP address? Is this
> possible? If so any help would be greatly appreciated.
>
> Thank you
>
> David Maas
>
>
>
> ================================================================================
> To unsubscribe from this mailing list, please see the instructions at
> http://www.checkpoint.com/services/mailing.html
> ================================================================================
>
>
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
