I had the same experience with eSafe version 3 in CVP mode. I went back to
version 2.1 and the problem went away. Version 3 running as a relay looks
like an elegant solution. The firewall is not involved in the virus
scanning. I plan to try this at some time in the future.
David Hoobler
-----Original Message-----
From: Frank Darden [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, May 30, 2001 5:07 PM
To: 'Mark Ingles'; [EMAIL PROTECTED];
[EMAIL PROTECTED]
Subject: RE: [FW1] Problem with eSafe and CPFw1 sp3
I would consider running esafe mail instead. It doesn't use CVP, its
basically a mail relay. Although it SHOULD be simple, CVP implementation is
not for the faint of heart!
Frank
-----Original Message-----
From: Mark Ingles [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 29, 2001 8:47 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: [FW1] Problem with eSafe and CPFw1 sp3
I think your problem is with eSafe. I can't get v3.x to work reliably for
more than a few hours. I had to downgrade back to version 2.x in order to
get the mail flowing. As soon as I started the older service, the mail came
through.
HTH - Mark Ingles
At 05:42 AM 5/24/01, [EMAIL PROTECTED] wrote:
>Hi to all,
>
>I've got a problem with SMTP, Firewall-1 sp3 ( Check Point VPN-1(TM) &
>FireWall-1(R) Version 4.1 Build 41814 [VPN + DES])
>running on two balanced Solaris 2.6 (SunOS 5.6 Generic_105181-23 sun4u
>sparc
>SUNW,Ultra-60) with StoneBeat
>(StoneBeat FullCluster for FireWall-1 2.0.2035) and eSafe 3.02 over two
>Windows 2000 Server (CVPs).
>
>The problems is that mails are queued and marked as R* in $FWDIR/spool
>directory of firewall and are not sent. The AV_SETTING is
>set to "cure".
>
>I think there is a problem with the firewall. Also I tried to execute "fw
>mdq" command and "kill -HUP mdq" as past postings in
>the bugtraq mailing list said, but it doesn't work.
>
>any ideas about?
>
>TIA.
>
>Regards,
>
> Josu�
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
