Hi Ivan,
I've opened all ports in Menu 15. Shouldn't this open ports
256 /264? I also turned off all filters in Menu 21.
Menu 15 - SUA Server Setup
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 0.0.0.0
2. 2 65000 192.168.0.12
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 1026 1026 RR Reserved
Menu 21.1 - Filter Rules Summary
# A Type Filter
Rules M m n
- - ---- ---------------------------------------------------------------
- - -
1 N IP Pr=6, SA=0.0.0.0, DA=0.0.0.0,
DP=137 N D N
2 N IP Pr=6, SA=0.0.0.0, DA=0.0.0.0,
DP=138 N D N
3 N IP Pr=6, SA=0.0.0.0, DA=0.0.0.0,
DP=139 N D N
4 N IP Pr=17, SA=0.0.0.0, DA=0.0.0.0,
DP=137 N D N
5 N IP Pr=17, SA=0.0.0.0, DA=0.0.0.0,
DP=138 N D N
6 N IP Pr=17, SA=0.0.0.0, DA=0.0.0.0,
DP=139 N D F
Menu 21.2 - Filter Rules Summary
# A Type Filter
Rules M m n
- - ---- ---------------------------------------------------------------
- - -
1 N IP Pr=17, SA=0.0.0.0, SP=137, DA=0.0.0.0,
DP=53 N D F
2 N
3 N
4 N
5 N
6 N
Menu 21.3 - Filter Rules Summary
# A Type Filter
Rules M m n
- - ---- ---------------------------------------------------------------
- - -
1 N IP Pr=6, SA=0.0.0.0, DA=0.0.0.0,
DP=23 N D N
2 N IP Pr=6, SA=0.0.0.0, DA=0.0.0.0,
DP=21 N D N
3 N IP Pr=6, SA=0.0.0.0, DA=0.0.0.0,
DP=80 N D F
4 N
5 N
6 N
With these changes it seems the Netgear RT314 should not do any
filtering and should allow all ports to reach my computer, which
is 192.168.0.12. However neither ping nor telnet will work if SecuRemote
is turned on. If I remove the RT314 from the system, then both ping
and telnet do work with SecuRemote.
To summarize the ping results:
Without SecuRemote, without RT314 Ping works
Without SecuRemote, with RT314 Ping works
With SecuRemote, without RT314 Ping works
With SecuRemote, with RT314 Ping fails.
Any thoughts or advice on this would be much appreciated!
Thanks,
John
At 01:53 AM 12/23/2001 , you wrote:
>Hello
>
>In your rt314, you should have a look to filter set configuration and open
>securemote topology ports 256 /264
>There is the default filter 3 that could also limit your communication
>abilities.
># A Type Filter Rules n
>- - ---- ---------------------------------------------------------------
>1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23 N
>2 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=21 N
>3 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=80 F
>4 N
>5 N
>6 N
>
>HTH
>Ivan
>
>The Lahrs <[EMAIL PROTECTED]>
>Envoy� par : Mailing list for discussion of Firewall-1
><[EMAIL PROTECTED]>
>23/12/2001 07:22
>Veuillez r�pondre � Mailing list for discussion of Firewall-1
>
>
> Pour : [EMAIL PROTECTED]
> cc :
> Objet : [FW-1] SecuRemote/Netgear/Cable Modem question
>
>I'm running a WinME PC through a Netgear RT314
> (RAS F/W Version: V3.25(CA.0) | 5/4/2001)
>Gateway Router and a Cable Modem. I must use SecuRemote to
>reach my office computers. This worked prior to installing the
>RT314. Which setting must be modified on the RT314 so that
>I can again connect using SecuRemote?
>
>Thanks,
>John
John C. Lahr
[EMAIL PROTECTED]
Central Region Geologic Hazards Team
U.S. Geological Survey
PO Box 25046
Denver, CO 80225
=================================================
To set vacation, Out Of Office, or away messages,
send an email to [EMAIL PROTECTED]
in the BODY of the email add:
set fw-1-mailinglist nomail
=================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
=================================================
If you have any questions on how to change your
subscription options, email
[EMAIL PROTECTED]
=================================================
