i'm trying to create a NAT pool to be used for our secure remote clients. I defined an address range which is in the 172.16.x.x network, which is the network of our internal LAN. NAT pool is (172.16.50.2 - 99) these particular ip's are not being used on our LAN. On the NAT tab of the address range i checked "add automatic address translation rules" and picked "hide" for translation method and checked "hide behind the interface of the install on gateway" and Install on gateway "all"
then under policy, global properties i checked the "enable ip pool NAT for secureremote/secureclient and gateway ....... then under the vpn communities object i made under the participant gateways properties, under nat i checked the "use ip pool NAT for secureremote ...." box and chose the address range that i made above. i saved all and this doesn't work. If i disable the "use ip pool NAT for secureremote....) box it works fine but with no NAT any ideas? thanks, ted element k ================================================= To set vacation, Out Of Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
