Re: [FW-1] Problem in setup NG FP3 on Solaris

[Bill]

Title: Problem in setup NG FP3 on Solaris

You need to enable SIC (Secure Internal Communications).  SIC replaces "fw putkey" as the method for establishing communications.  This needs to be done on both devices to work properly.  I have not done this on Solaris, but the firewall will most likely be configured through the command line utility (cpconfig) and the management server through the gui on the firewall object.   good luck ----- Original Message ----- From: Ruiyuan Jiang To: [EMAIL PROTECTED] Sent: Tuesday, February 18, 2003 8:34 AM Subject: [FW-1] Problem in setup NG FP3 on Solaris Hi, all I am in the process to test setup NG FP3 on Solaris 9 with distributed environment which seperates firewall module and management server (both Solaris 9). I am thinking to allow these systems only use local hosts file to resolve themselves instead of DNS, etc. I installed SVN foundation first and then immediately installed firewall software on these systems. For one system I chose the option "management server" and the other one system with option "firewall module" in "cpconfig". When I launch GUI client software and tried to connect to the firewall module, I got a message "initilized but not trusted" in the communication section of the Check Point module of GUI client even when I unloaded security policy on the firewall module. I can't communicate with the firewall module host in and out (it seemed that the network cable is unplugged from network on the firewall module host). If I delete the Check Point software from the firewall module host so it became a regular UNIX host, I can ping, telnet, ftp, etc. in and out the firewall module host (it seems that I plugged network cable on the firewall module host). Does anyone see this problem before? Thanks in advance. Ryan Jiang