I am trying to debug what I think is a NAT problem - started after upgrading 4.0 to SP5 on Solaris 2.6. The customer has a rule that permits telnet access to a server that is NAT'd and using User Authentication. The outside client can telnet directly onto the firewall (for a test only!) so routing is not the issue. When I try to check the incoming traffic with snoop I do not see any traffic to the external address that is statically NAT'd to the internal address. When I try to telnet out from the internal server snoop sees traffic going out from the NAT'd address but nothing coming back - i.e same problem in reverse. Should I be able to see traffic on the wire with snoop? I understood it sees incoming packets before anything else. Jim -- Jim Shaw Email: [EMAIL PROTECTED] Optimation NZ Ltd, DDI: +64-4-470-5831 P.O. Box 10616, Ph: +64-4-472-7218 Level 2, Optimation House, Fax: +64-4-472-7219 1 Grey Street, Web: http://www.optimation.co.nz Wellington, New Zealand ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
