Looks like the server is cutting you off.
Looks like they might be checking DNS when connecting.
Check your DNS
Make sure that forward matches reverse.
At 05:25 PM 6/2/00, Tucker, Greg wrote:
>When I click on a link to an specific IBM FTP site (and one other site
>that I know of), I immediately get:
>
>A network error occurred while Netscape was receiving data.
>(Network Error: Connection reset by peer)
>Try Connecting again.
>
>The log shows only the outgoing request from my machine with no other entry.
>
>When I try to go to the same site using FTP from an MSDOS window, I get:
>
>C:\>ftp <ftp://ftp.software.ibm.com>ftp.software.ibm.com
>Connected to service.boulder.ibm.com.
>220-***************************************
>Connection closed by remote host.
>
>Again, in the log I only see my outgoing request and no other log entries
>that refer to my address or the destination (either as a source or a
>destination).
>
>I currently am logging everything.
>I have Log Implied Rules checked.
>No Nat being done at the firewall.
>
>It appears, since there are no other log entries, that the reset must be
>coming from the firewall itsself.
>If I put a machine on the Internet interface, the FTP works fine.
>
>Any ideas?
>
>I've checked through the archives and found what looked like the same
>problem but a solution was never suggested.
>
>
>
Tim O'Connor
[EMAIL PROTECTED]
[EMAIL PROTECTED]
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
