Firewall-1 can do this on a service by service basis.( eg: smtp to one box,
http to the other) If you need http static external to two internal IP
addresses to load balance a single service, such as http, then Dan is
correct. You will need to purchase connect control to do this.
Cheers!
Frank
-----Original Message-----
From: Dan Hitchcock [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 12, 2000 5:10 PM
To: 'Peter Tan'; '[EMAIL PROTECTED]'
Subject: RE: [FW1] Two to One static NAT
What you propose would not provide load balancing unless you are using the
Checkpoint connect control module (or some other third party solution) to
balance between the servers. What are you using as the load balancing
mechanism?
Dan Hitchcock
MCSE, CCNA
Network Engineer
HomeStreet Bank
206.389.4467
[EMAIL PROTECTED]
-----Original Message-----
From: Peter Tan [mailto:[EMAIL PROTECTED]]
Sent: Sunday, June 11, 2000 7:32 AM
To: [EMAIL PROTECTED]
Subject: [FW1] Two to One static NAT
I have a situation that there are two web servers behind the firewall. The
two web server are having IP address 192.168.2.9 and 192.168.2.10 and I
want to NAT to only one static address 203.116.89.10 using the firewall
NAT. So the DNS server will have A record to 203.116.89.10. So providing
load balancing. Will this work? Can firewall able to accept mapping of 2
internal IP addresses using statics NAT map to one external IP address?
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
