1) so, 'fw printlic -k' gives me this:
This is VPN-1(TM) & FireWall-1� Version 4.0 (13Jul2000 15:35:46)
(printing license embedded in fw-1 kernel module)
Type Expiration Ver Features
195.171.37.250 Never 4.x encul ca vpndes
and that's OK.
2) I'm running in 32 bit mode, so that's not the problem :-/
and the 'dmesg | grep license | grep -v "No valid" ' doesn't give me
anything, so I don't have a valid license, for him !
Firebird
----- Original Message -----
From: Prakken, David <[EMAIL PROTECTED]>
To: 'Firebird' <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Wednesday, July 12, 2000 4:00 PM
Subject: RE: [FW1] GUI problems...
> Hmmm ...
>
> A couple things to check:
>
> 1) Do a fw printlic -k to make sure the license is installed in the
kernel.
> If not, the solution is to do a
> fw putlic -k ... to force it into the kernel.
>
> 2) Are you running in 64bit mode? If so, bring the system to the eeprom
> level and do a 'boot /kernel/unix'. This will start the system in 32 bit
> mode.
>
> No matter what, you will always get the same license errors, but the final
> entry should say 'license ok'. You can do a 'dmesg | grep license' to
verify
> this.
>
> Dave
>
> -----Original Message-----
> From: Firebird [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, July 12, 2000 9:34 AM
> To: Prakken, David; [EMAIL PROTECTED]
> Subject: Re: [FW1] GUI problems...
>
>
>
> Yeah, I understood that they won't ask to put the localhost in the
> gui-clients file. :o)
>
> I don't even tried to use fwui or any local GUI, I just try to use the GUI
I
> just installed on my NT box. So I receive the message on the SUN station,
> and on the NT station, to tell me the reason why it doesn't connect to the
> management station. so look at this ->
>
> A: FW station + management station
> B: NT station + GUI
>
> A <--- B (wants to connect)
> A ---> B (refuses the connect of B and tells it doesn't find any valid
> license)
> A (syslogs that it doesn't find any valid license and refuses the
> connection of B)
>
> btw, when I boot the system and when he's pushing the ethernet interfaces
up
> (le0, qfe0, qfe1, qfe2 and qfe3), I receive notices like these :
>
> Jul 13 13:06:27 xxx.xxx.xxx unix: FW-1: only 25 internal hosts allowed
> Jul 13 13:06:27 xxx.xxx.xxx unix: FW-1: No valid license
>
> 'fw stat' gives me this :
>
> HOST POLICY DATE
> localhost - - :
>
> and 'fw printlic' gives me this :
>
> This is VPN-1(TM) & FireWall-1� Version 4.0 (13Jul2000 13:30:29)
>
> Type Expiration Ver Features
> <IP of le0> Never 4.x encul ca vpndes
>
> For me, everything seems corrrect, I just don't see where the problem
> resides, can someone help me to find out where or how I can fix it, please
?
>
> Firebird
>
> ----- Original Message -----
> From: Prakken, David <[EMAIL PROTECTED]>
> To: 'Firebird' <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]>
> Sent: Wednesday, July 12, 2000 2:27 PM
> Subject: RE: [FW1] GUI problems...
>
>
> > The GUI client setting is only for management by remote workstations.
You
> > still need the "motif" license on the Sun box to get the local GUI
> > interface.
> >
> > The license message is just a cosmetic problem with Sun. You can verify
> the
> > installation with a fw stat.
> >
> > Dave
> >
> > -----Original Message-----
> > From: Firebird [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, July 12, 2000 4:44 AM
> > To: [EMAIL PROTECTED]
> > Subject: [FW1] GUI problems...
> >
> >
> >
> > Hello,
> >
> > I just installed FireWall-1 on a SPARC20 running w/ Solaris 7. I
> > installed the Firewall and management module on it, and want to access
the
> > management station with my GUI on an NT box. I already fwconfig'ed ad
> added
> > my IP as GUIhost, aswell as the license aso. The license is licensed to
> the
> > IP on le0.
> > Now the problem:
> > When I reboot the system, everything goes fine, except that when
it
> > configures the network card (le0, qfe0-qfe3) it tells me tha it doesn't
> find
> > a valid license (and I'm sure the license is valid) and that the
FireWall
> is
> > limited to 25 internal hosts. When I try to connect to the management
> > station with my GUI, it denies the access and tells that it doesn't find
a
> > valid license for User Interface.
> >
> > I'm pretty new in this subject and would be grateful for any help, I
> > quickly looked at the FAQ of Phoneboy and didn't find anything about
that
> > subject (thougt I must admit I didn't read everything :o))
> >
> > Thanks for any help,
> > Firebird
> >
> > P.S.: This is the second post, the first one doesn't seem to have appear
> in
> > the list..
> >
> >
> >
> >
>
============================================================================
> > ====
> > To unsubscribe from this mailing list, please see the instructions
at
> > http://www.checkpoint.com/services/mailing.html
> >
>
============================================================================
> > ====
>
>
>
>
============================================================================
> ====
> To unsubscribe from this mailing list, please see the instructions at
> http://www.checkpoint.com/services/mailing.html
>
============================================================================
> ====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
