Does the machine have a modem and NIC in it and are you releasing the IP for the NIC when using the Modem?
-----Original Message-----
From: Igor Gambarin [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 09, 2000 7:57 PM
To: [EMAIL PROTECTED]
Subject: [FW1] Questions
Hi all!
I'm using FW-1 (4.1) and SecureRemote 4.1.
In my configuration, I'm using IP pools to support multiple entry points
(MEP) and I'm using Hybrid IKE and WINS service I get from Linux stations
using nmbd from Samba (this is better for few subnets then WINS service from
NT).
1. After I'm adding these lines in $FW/conf/objects.C:
:sdl_logon_timeout (180)
:ip_pool_vpn (true)
:netbios_nat (true)
I do fwstop&fwstart, or reinstall policy, these lines are deleting from the
file: $FW/conf/objects.C.
This is the last recommendation, that I'm trying to do, so I can see
"Network Neighborhood".
2. After realization of all other recommendations from PhoneBoy and Check
Point I'm still cannot see "Network Neighborhood" and make normal login to
NT domain, but I can connect to share disk drives from any stations by
\\name_station\disk (without username and password) and when I try find
stations by name from Find-> Computer, I succeeded with this.
Are there any ideas, or may be I missed something during the configuration,
or may be name resolving (WINS) for SecureRemoute doesn't work with nmbd
from Samba?
Thank a lot,
Igor
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
