Hello everyone.
I have an NT 4.0 box running Firewall-1 4.0. I setup another NT
4 box on our internal lan running PPTP with an address of 192.168.1.136
and created a static external address as well for it. I followed the normal
NAT setup and created the following rules as well.
Service: GRE, Match ip_p = 47
Service: PPTP, Port 1723 TCP
I set this rule up for internal server to be able to send and receive
traffic.
I still have no ability to do PPTP from outside the firewall. In the
log viewer i can see the traffic being allowed, but the client just doesn't
connect and quits.
I have searched and some people say it can't be done, some people have
said it works.
I have created a route such as route add 206.126.32.101 192.168.1.136 and
did an arp as well on the firewall box.
Is there anything i may be missing or is there a service pack level i
should be at on this box?
I don't see it making much sense in plugging in an NT server on the external
side of the firewall since that basically adds more gateways into the
network. Our internet router plugs right into the firewall and then it hits
our network. I don't have to have to plug in a hub and have a server
external to the firewall that can still speak to our internal network since
that would require more work then i want to do and more maintenance.
I would figure FW1 would be capable of doing this since i can do this on my
59.00 Winproxy server at home :)
Thanks for any help and ideas.
-byron
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
