Simpler way is to enable Radius server on the ACEserver and use Radius on
the firewall. No /var/ace/sdconf.rec and not securid file....
Kirtikumar Satam
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
Massimo Manzato
Sent: Tuesday, August 22, 2000 7:30 AM
To: [EMAIL PROTECTED]
Subject: Re: [FW1] SecurID & FireWall-1 4.1 SP2
I have found the solution to this problem, in my case:
FW-1 on NT
Ace Server 4.1
Ace client 4.3
- the sulution is:
- install the Ace client on FireWall-1 whithout activate it, but
test is indispensable for the FIRST comunication, of the securid file.
- to define e client on Ace server that represent
the external interface of FireWall-1, (this is for my configuration)
And now all function perfectly!!
Hope this help
Massimo Manzato
IKS s.r.l.
Italy
Massimo Manzato wrote:
>
> Hi ALL,
>
> I have this problem width the authentication by SecurID,
> from other client authentication correctly performed, but from
> FireWall-1, I receive the:
>
> Error in the FireWall log
> Error: "Access denied by SecurID"
> Error on client
> Error: "Access denied for user ace-test by SecurID"
> Error on Ace Server Log
> Error: "Passcode incorrect"
============================================================================
====
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
============================================================================
====
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
